DB13/T 5088-2019
Active
T/TSI 001-2019
Active
Group standards
T/TSI 001-2019 Synthetic material sports ground surface technical requirements
T/TSI 001-2019 Synthetic material sports ground surface technical requirements
Price:
$ 20.00
Basic Information
Standard Code:
T/TSI 001-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Rubber products and their auxiliary materials
ICS Name:
The production process of the rubber and plastics industry
Publish Date:
2019-11-01
Implement Date:
2019-11-01
Scope
Scope: This standard specifies the terms and definitions, product classification, technical requirements, and test methods for synthetic material sports flooring; inspection rules; marking; and transportation and storage. Main technical content: 5.1 Installation requirements 5.1.1 The installation of synthetic material sports flooring should comprehensively evaluate the ventilation and dispersion conditions of the site and its surroundings, facilitate the emission of volatile organic compounds, and avoid pollution to the site and surrounding environment during installation caused by exhaust gases, wastewater, and solid waste. 5.1.2 Before installation, a list of required raw materials (including product names and quantities) should be provided. The raw materials used and the sports flooring after installation should not pose a hazard to human health and the environment under normal and expected use conditions. 5.1.3 The surface of the synthetic material sports flooring should be flat, clean, free from cracks, delamination, or damage, and have consistent color without obvious color differences. The adhesion between layers should be firm and uniform. 5.2 Physical properties 5.2.1 The physical properties of synthetic material sports flooring should comply with the requirements specified in Table 1. Table 1: Physical properties of synthetic material sports flooring Parameter Requirements Test method Thickness (mm) Athletics field: average thickness ≥13 Ball fields: average thickness ≥8 Other activity fields: average thickness ≥10 Impact absorption % Water-permeable type: 35-50 Non-water-permeable type: 35-50 Vertical deformation (mm) Athletics field: 0.6-2.5 Ball fields, other activity fields: 0.6-3.0 Anti-slip value (BPN, 20℃) Athletics field: ≥47 (wet test) Ball fields, other activity fields: 80-110 Tensile strength (MPa) Water-permeable type: ≥0.4 Non-water-permeable type: ≥0.5 Elongation at break (%) ≥40 Burning performance Grad
Development Information
Related Standards
DB37/T 3183-2018
Active
DB37/T 3183-2018 Implementation Guide for the Inspection and Management System of Production Safety Hazards in the Synthetic Resin Industry Enterprises
DB37/T 3182-2018
Active
DB37/T 3182-2018 Synthetic resin industry enterprise safety production risk classification management system implementation guideline
SN/T 5248-2020
Active
SN/T 5248-2020 The Determination of Gold Content in Imported Resin Materials Containing Gold by Flame Atomic Absorption Spectrometry (SN/T 5248-2020)
T/QGCML 244-2021
Abolished
T/QGCML 244-2021 Skewed wave-shaped guard belt conveyor with large incline angle
T/QGCML 216-2021
Abolished