GB/T 3533.1-1983
Replaced
T/CNFPIA 3008-2019
Active
Group standards
T/CNFPIA 3008-2019 Foamed plastic surface decoration products
T/CNFPIA 3008-2019 Foamed plastic surface decoration products
Price:
$ 20.00
Basic Information
Standard Code:
T/CNFPIA 3008-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Fire-resistant materials
ICS Name:
General Principles of Standardization
Publish Date:
2019-11-15
Implement Date:
2019-12-01
Scope
Scope: 1 Scope This standard specifies the terms and definitions, classification, technical requirements, inspection methods, inspection rules, marking, packaging, storage, and transportation of film-pressed decorative products. This standard applies to film-pressed decorative products. Main technical content: 3 Terms and definitions The terms and definitions defined in GB/T 18259–2018 and the following provisions apply to this document. For ease of use, some terms and definitions from GB/T 18259–2018 are repeated below. 3.1 Film-pressed decorative products Decorative products with film by pressing. These products are made of single-sided decorative plywood as the base material. After processing and gluing, a thermoplastic decorative film is vacuum-sucked and heat-pressed onto the front and sides of the base material in one go. 3.2 Thermoplastic decorative film A thermoplastic resin film with a back-coated treatment as the base material. After direct or surface printing, it can be made into a composite decorative film with a transparent film on the front. 3.3 Surface resistance to staining The ability of the product surface to withstand the effects of acid and alkali chemical reagents and commonly used beverages and seasonings. [GB/T 18259–2018, Definition 3.4.81] 3.4 Surface resistance to wear The ability of the product surface to maintain its original pattern and color under certain frictional forces. [GB/T 18259–2018, Definition 3.4.82] 3.5 Resistance to cold and heat cycles The ability of the product to maintain its original surface performance after cold and heat cycle testing. [GB/T 18259–2018, Definition 3.4.85] 3.6 Edge and corner breakage The phenomenon of missing or damaged corners or edges of the product due to improper mechanical or human operations. [Note: Revised from GB/T 18259–2018, Definition 2.46] 3.7 Color mismatch The color of a certain pattern does not match the color of the given standard sample pattern. [GB/
Development Information
Related Standards
GB/T 12366.1-1990
Replaced
GB/T 12366.1-1990 Guideline for the work of complex standardization—Principle and method
GB/T 12366.2-1990
Replaced
GB/T 12366.2-1990 Guideline for the work of complex standardization—General requirements of complex standardization for industrial products
GB/T 12366.3-1990
Replaced
GB/T 12366.3-1990 Guideline for the work of complex standardization—General requirements of complex standardization for agriculture products
GB/T 12366.4-1991
Replaced
GB/T 12366.4-1991 Guideline for the work of complex standardization—Drafting method for program of standard-complex
GB/T 12366.5-1991
Abolished