T/CAEE 027-2026 Outdoor Camp Space Capsule

Scope

5 Technical Requirements Structural Design 5.1.1 Exterior Design The appearance of the space capsule should be novel, with a coordinated overall color scheme, no obvious color differences, and a smooth surface free from noticeable scratches, deformations, or stains. Decorative lines should be smooth and orderly. 5.1.2 Welding Quality All welds should meet the design requirements, be smooth and firm, and free from defects such as burrs, arc pits, cracks, surface inclusions, air bubbles, incomplete welds, or leaks that could affect use. 5.1.3 Sealing Performance The doors, windows, and sealing parts of the space capsule should be able to resist rain and snow and maintain a sealed state, with no leaks or seepage. 5.1.4 Dimensional Requirements The standard space capsule should be at least 5,000 mm long, 2,500 mm wide, and 2,500 mm high. It can be customized based on actual needs, but must meet the comfort and safety requirements of the internal space. 5.1.5 Limit Deviations The dimensional limit deviations should be ±10 mm. 5.1.6 Appearance of Structural Components a) If carbon steel materials are used for structural components, they should be treated with anti-corrosion measures. Before coating, rust and dirt removal should be carried out. b) The joints of wall panels should be firmly connected, with uniform panel gaps. c) The joints of external wall panels should be uniform, with even and smooth caulking. d) All connecting fixtures should be in a tightened state and free from missing parts. 5.1.7 Door Requirements a) The space capsule doors should open smoothly without any sticking. b) The space capsule entry doors should use smart sensing locks. c) Safety anti-theft locks are installed inside the capsule. Material Requirements 5.2.1 Shell Materials: High-strength, corrosion-resistant, and fire-resistant materials should be used. a) Steel materials should use materials not lower than Q235 steel. b) Welding materials sho

Development Information

Related Standards