T/LBIA 007-2024 Bamboo mouse

Scope

Main Technical Content: 5. Technical Requirements 5.1 Raw Material Requirements 5.1.1 Bamboo Requirements The bamboo plywood and bamboo strips used for the bamboo mouse shell should be made from fresh bamboo aged between 3 and 5 years. 5.1.2 Plastic Components Requirements The plastic grinding tools and components used in the bamboo mouse should comply with the relevant requirements of GB/T 22470. 5.1.3 Electrical Components Requirements The electrical components used in the bamboo mouse should comply with the relevant requirements of GB 4943.1. 5.2 Appearance and Structural Requirements 5.2.1 The product surface should not have obvious dents, scratches, cracks, deformation, burrs, insect holes, rot, or mold. 5.2.2 The plated coating should be smooth, uniform, and consistent in color, without bubbling, cracking, peeling, or scratches. 5.2.3 Metal parts should not have rust or other mechanical damage. 5.2.4 All exposed surfaces of the bamboo shell and bamboo components should be coated with paint. 5.2.5 The product should not have moldy or other obvious odors. 5.2.6 All components of the product should be firmly fastened without looseness, and the buttons and switches should be flexible and reliable. 5.2.7 The mouse should move smoothly and freely. 5.2.8 The text, symbols, and logos describing the functions should be correct, clear, and neat, and the product layout should be reasonable. 5.3 Dimensional Requirements The dimensional requirements for the bamboo mouse should comply with Table 1. Table 1: Dimensional Requirements for Bamboo Mice Item Unit Dimensional Requirements Left and Right Buttons Key Gap mm 1.0±0.5 Left and Right Button Travel Gap mm 1.5±0.5 Base and Shell Spacing mm 0.5±0.2 Base and Shell Assembly Height Difference mm Average Assembly Height Difference h≤0.3 Maximum Assembly Height Difference hmax≤0.5 5.4 Physical and Chemical Performance The physical and chemical perform

Development Information

Related Standards