T/CATSI 02016-2022 Active Group standards

T/CATSI 02016-2022 Compressed hydrogen gas aluminum inner cylinder carbon fiber fully woven gas cylinder for container use

Publish Date: 2022-03-10 Implement Date: 2022-03-30 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/CATSI 02016-2022

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Pressure vessel

ICS Name: Pressure vessels, gas cylinders

Publish Date: 2022-03-10

Implement Date: 2022-03-30

Scope

Main technical content: This document sets out requirements for the type and parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of compressed hydrogen aluminum-lined carbon fiber fully wrapped gas cylinders (hereinafter referred to as gas cylinders) used in compressed hydrogen storage and transportation equipment for containers with a total volume of more than 3,000L and other skid-mounted structures. This document is applicable to the design and manufacture of refillable gas cylinders with a nominal working pressure not exceeding 52MPa, a nominal water volume not less than 150L and not more than 450L, and a storage medium of compressed hydrogen, operating at temperatures between -40℃ and 85℃. However, if used in containers, the nominal working pressure of the wrapped hydrogen cylinders can only be 52MPa, and the nominal water volume is 300~350L. Considering the particularities of the pneumatic cylinder valves and end plugs PRD structures used in gas cylinders installed on containers, as well as the experience of using container gas cylinder groups, and based on the results of multiple sets of tests, it is stipulated that the temperature of the container gas cylinder valves and end plugs shall not exceed 65℃. This document refers to GB/T 35544 "Car-used Compressed Hydrogen Aluminum-lined Carbon Fiber Fully Wrapped Gas Cylinders", and also references the content of the type test part in ISO 11119-2-2020 "Design, Construction, and Testing of Refillable Composite Gas Cylinders and Tubes - Part 2: Fully Wrapped Fiber-Reinforced Composite Gas Cylinders and Tubes up to 450L with Load-Sharing Metal Liners".