T/CGMA 0804-2022 Active Group standards

T/CGMA 0804-2022 H/R Series Gear Reducer General Technical Specification

Publish Date: 2022-09-10 Implement Date: 2022-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/CGMA 0804-2022

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Compressors and pneumatic machinery

Publish Date: 2022-09-10

Implement Date: 2022-11-01

Scope

Scope: This document specifies the models, markings, and installation methods, technical requirements, test methods, inspection rules, markings, packaging, transportation, storage, and industrial applications of H/R series gear reducers (hereinafter referred to as "reducers"). This document applies to reducers with an ambient temperature of -20°C to +45°C, an altitude of no more than 5000m, and a rated output torque of no more than 900 kN·m; the maximum speed of the high-speed shaft should not exceed 1800 r/min or the maximum circumferential speed of the gear should not exceed 25 m/s. When the circumferential speed of the gear exceeds 25 m/s, the technical requirements of the reducer shall be determined by the manufacturer in consultation with the user. Main technical content: This document specifies the models, markings, and installation methods, technical requirements, test methods, inspection rules, markings, packaging, transportation, storage, and industrial applications of H/R series gear reducers (hereinafter referred to as "reducers"). This document applies to reducers with an ambient temperature of -20°C to +45°C, an altitude of no more than 5000m, and a rated output torque of no more than 900 kN·m; the maximum speed of the high-speed shaft should not exceed 1800 r/min or the maximum circumferential speed of the gear should not exceed 25 m/s. When the circumferential speed of the gear exceeds 25 m/s, the technical requirements of the reducer shall be determined by the manufacturer in consultation with the user.