T/ZJGS 19-2023 Passive Smart Lock Part 2: NFC Proximity Power Supply

Scope

Main Technical Content: 7.1 Surface Quality The trademarks, writing, and patterns on the product surface should be clear and neat. The exposed surface should not have obvious defects such as burrs, pits, hard imprints, sand holes, or scratches. The electroplated surface should not have visible bubbles, delamination, or exposed base layers. The coated surface should have uniform color and no obvious bubbling or peeling. 7.2 Functionality 7.2.1 Self-Check Function When the passive lock starts working, it should indicate its normal operating status through an indicator or display. 7.2.2 Login Function When operating according to the steps specified in the product manual, the user should be able to log in successfully. 7.2.3 Delete Function When operating according to the steps specified in the product manual, the user should be able to delete the logged-in user information successfully. 7.2.4 Information Retention Function When the power supply is cut off or the battery is replaced, the information stored in the passive lock should not be lost. 7.2.5 User Authorization Management Function The passive lock should have a hierarchical user authorization management function, with corresponding authorization mechanisms during the login and deletion processes. 7.3 Enclosure Protection Level The protection level of the passive lock enclosure should comply with Table 2. 7.4 Flexibility 7.4.1 Opening Response Time After NFC information input is completed, the opening response time should not exceed 5 seconds. 7.4.2 Mechanical Key Opening The mechanical key opening of the passive lock should be flexible. The key opening torque M1 should not exceed 1 N·m, and the lock beam should be able to open. 7.4.3 Mechanical Key Insertion and Removal Force The mechanical key insertion and removal force should not exceed 10 N. 7.4.4 Lock Beam Downward Closing Force The lock beam downward closing force should not exceed 50 N. 7.5 Robustness

Development Information

Related Standards