T/CNFPIA 3016-2021 The quality requirements for edge finishing of customized furniture components from man-made board

Scope

Scope: This document specifies the quality requirements for the edge-banding of customized wooden furniture panels made from wood-based panels. This document is applicable to customized wooden furniture panels made from wood-based panels; Main technical content: 3. Terms and definitions: The terms and definitions defined in QB/T 4463–2013 and GB/T 18259–2018, as well as the following terms and definitions, are applicable to this document. For ease of use, some terms and definitions from QB/T 4463–2013 are listed below. 3.1 [Source: QB/T 4463–2013, Section 3.1] 3.2 Edge-banding strips: Strips or rolls of thin material used for edge-banding on furniture panels and serving to cover, protect, and decorate the edges of panels. Generally, they should be coordinated with the veneer material and commonly include plastic edge-banding strips, melamine edge-banding strips, and wooden edge-banding strips. Plastic edge-banding strips: Plastic strips or rolls made from various synthetic resins (with or without additives), typically featuring plain surfaces or those printed or extruded with patterns. Common types include polyvinyl chloride (PVC) edge-banding strips, acrylonitrile-butadiene-styrene (ABS) edge-banding strips, polyethylene (PE) edge-banding strips, polypropylene (PP) edge-banding strips, polystyrene (PS) edge-banding strips, and polymethyl methacrylate (PMMA, also known as acrylic) edge-banding strips. [Source: QB/T 4463–2013, Section 3.2] 3.3 Edge-banded panels: Home furnishing components made by bonding edge-banding strips to the edges of panels using hot-melt adhesives. 3.4 Glue lines: Strips formed after the curing of edge-banding adhesives. 3.5 Pinholes: Small needle-like holes on the surface of glue lines. 3.6 Interface gaps: Gaps at the interface of adjacent edge-banding strips on panels. 4 Classification 4.1 By edge-banding adhesive: a) EVA adhesive edge-banding; b) PUR adhesive edge-banding; c) Other adhesive edge-banding.

Development Information

Related Standards