T/SDAHA 005-2023 Active Group standards

T/SDAHA 005-2023 Veterinary oral solution bottle made of polyvinyl chloride blow molding bottle

Publish Date: 2023-09-26 Implement Date: 2023-10-25 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/SDAHA 005-2023

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Laboratory medicine

Publish Date: 2023-09-26

Implement Date: 2023-10-25

Scope

Main technical content: 6. This standard specifies the technical requirements for polyethylene blow-molded bottles for oral solutions of veterinary drugs. The appearance quality requirements shall comply with the provisions of Table 2, the dimensional deviations shall comply with the provisions of Table 3, the quality deviations shall comply with the provisions of Table 4, and the characteristic indicators shall comply with the provisions of Table 5. **Table 2: Appearance Quality Requirements** **Item Requirements** - The bottle cap shall be fully formed and smooth, without burrs or cracks. - The bottle body shall be smooth without burrs, bubbles, oil stains, cracks, or holes. - There shall be no obvious scratches or stripes. - The bottle shall stand upright stably. **Table 3: Dimensional Deviations (ml)** **Item** - Dimensional deviations (mm) 50 < V ≤ 500: ±1.0 50 < V ≤ 1000: ±1.0 **Table 4: Quality Deviations (ml)** **Item** - Quality deviations (%) 50 < V ≤ 100: ±4 100 < V ≤ 500: ±5 500 < V ≤ 1000: ±7 **Table 5: Characteristic Indicators** **Item Requirements** 1. Sealing test: no leakage 2. Symmetrical wall thickness of the bottle body ≤ 1.2:1 3. Capacity deviation ≥ 105% 4. Drop test: no damage, no springing of the cap, no leakage during impact 5. Stacking test: no deformation, no collapse, no leakage 6. Low-temperature resistance test: no damage, no deformation, no leakage 7. High-temperature resistance test: no damage, no deformation, no leakage 8. Residual flame combustion: residual flame combustion ≤ 0.1% 9. Dissolution test: clarity of the solution should be clear. If cloudy, compared with the No. 2 turbidity standard solution, it shall not be more concentrated 10. pH change difference: ±1.0 11. Absorbance at 220–360 nm: maximum absorbance ≤ 0.10 12. Oxidizable substances: difference in consumption of sodium thiosulfate titrant ≤ 1.5 mL 13. Non-volatile substances: difference in residua