T/SHFA 005.7-2023 Active Group standards

T/SHFA 005.7-2023 Group Furniture Procurement Supplier Implementation Guide Part 7: Education and Training Furniture

Publish Date: 2023-06-30 Implement Date: 2023-06-30 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/SHFA 005.7-2023

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Furniture

Publish Date: 2023-06-30

Implement Date: 2023-06-30

Scope

Scope: 1 Scope This document provides terms and definitions, product classification, general product requirements, material requirements, special product requirements, and technical evaluation for suppliers of educational and training furniture in group purchasing. This standard applies to the management and evaluation of suppliers of educational and training furniture in group purchasing. Main technical content: 6 Hazardous substances in materials The formaldehyde emission of furniture materials shall be ≤0.05mg/m3 (detection method according to GB/T 18580-2017), and the volatile organic compounds (TVOC) emission shall be ≤0.50mg/m2·h (72h), with the detection method meeting the requirements of HJ 571-2010. For substrates: 6.2.1 When using steel materials, they shall comply with the following requirements: - Cold-rolled steel plates with a thickness ≥0.7mm; - Cold-rolled steel tubes with a wall thickness ≥1.2mm. 6.2.2 The appearance and safety of glass doors shall comply with the requirements of GB/T 32446-2015, and cabinet furniture shall use tempered glass with a thickness ≥5mm and must be marked with the tempered glass logo. 6.2.3 Leather materials shall comply with the requirements of GB/T 16799-2018 and HJ 507-2009. 6.2.4 Fabric materials shall comply with the requirements of GB/T 19817-2005. 6.2.5 Sponge materials shall comply with GB 10802-2006 and meet the following requirements: - General soft polyurethane foam materials with a density ≥25kg/m3; - It is not recommended to use chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) as foaming agents; - It is recommended to use high-resilience soft polyurethane foam materials that meet the requirements of QB/T 2080-2018, with a density ≥30kg/m3 and use water as a foaming agent. 6.2.6 Plastic materials shall use impact-resistant copolymer polypropylene (PP) materials, meeting the requirements of 6.1.7, and the catalytic temperature of the test materials shall be -40℃ accordi