GB/T 16762-1997
Replaced
GB/T 43357-2023
Active
National standards
GB/T 43357-2023 Test methods for general property of steel wire ropes
GB/T 43357-2023 Test methods for general property of steel wire ropes
Price:
$ 93
Basic Information
Standard Code:
GB/T 43357-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wire, steel wire rope
ICS Name:
Wire, steel wire rope, and link chains
Publish Date:
2023-11-27
Implement Date:
2024-03-01
Pages:
27 pages
Scope
This document describes the diameter and uniformity of steel wire ropes, their ovality, twist pitch, weight per unit length, surface quality, non-loosening, straightness, flatness, residual torsion, breaking tensile strength, tensile breaking wire, total elongation at specified force and total elongation at breakage, elastic elongation and structural elongation, actual elastic modulus, bending fatigue, rotational performance, radial stiffness, salt spray test, oil content in steel wire ropes and strands, oil content in rope cores, rope core moisture content, strand clearance rate, strand forming rate, strand elongation, diameter of stripped steel wires, tensile strength, torsion, repeated bending, winding, Vickers hardness, coating quality, coating adhesion, coating uniformity, and inspection of aluminum zinc alloy coating aluminum content. This document is applicable to the inspection, measurement, and testing of various performance-related aspects of steel wire ropes.
Development Information
Referenced Standards
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 238-2002 Metallic materials—Wire—Reverse bend test
GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 239.1-2012 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 239.1-2023 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2972-1991 Zinc-coated steel wire—Test method for uniformity of zinc coating on wire by the copper sulphate dip
GB/T 2972-2016 Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip
GB 2976-1988 Metallic materials—Wire—Wrapping test
GB/T 2976-2004 Metallic materials—Wire—Wrapping test
GB/T 2976-2020 Metallic materials—Wire—Wrapping test
GB/T 4340.2-1999 Metallic vickers hardness test—Part 2:Verification of hardness testers
GB/T 4340.2-2012 Metallic materials—Vickers hardness test—Part 2:Verification and calibration of testing machines
GB/T 4340.3-1999 Metallic vickers hardness test—Part 3:Calibration of hardness reference blocks
GB/T 4340.3-2012 Metallic materials—Vickers hardness test—Part 3:Calibration of reference blocks
GB/T 8358-1987 Method of breaking tensile test for steel wire ropes
GB/T 8358-2006 Method of breaking tensile test for steel wire ropes
GB/T 8358-2014 Steel wire ropes—Determination of measured breaking force
GB/T 8358-2023 Steel wire ropes—Determination of breaking force
GB/T 8706-1988 Steel wire ropes—Terminology
GB/T 8706-2006 Steel wire ropes—Vocabulary, designation and classification
GB/T 8706-2017 Steel wire ropes—Vocabulary,designation and classification
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 12160-2002 Calibration of extensometers used in uniaxial testing
GB/T 12160-2019 Metallic materials—Calibration of extensometers systems used in uniaxial testing
GB/T 12347-1996 Steel wire rope—Bending fatigue testing
GB/T 12347-2008 Steel wire ropes—Bending fatigue testing
GB/T 16825.1-2002 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Calibration and verification of the force-measuring system
GB/T 21965-2008 Steel wire ropes—Vocabulary for acceptance and defect
GB/T 21965-2020 Steel wire ropes—Vocabulary for acceptance and defect
GB/T 40342-2021 Method for determination of aluminum content in hot dipped zinc-aluminum alloy coating on steel wire
YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy
YB/T 081-2013 Metallurgical technology standards for numerical rounding and determination of testing values
YB/T 4182-2008 The method for measuring the oil content of steel wire rope
YB/T 4288-2012 Elevator steel wire rope bending fatigue test method
YB/T 4933-2021 Elevator steel wire - Vickers hardness test method
GB/T 4340.2-2025 Metallic materials—Vickers hardness test—Part 2:Verification and calibration of testing machines
GB/T 4340.3-2025 Metallic materials—Vickers hardness test—Part 3:Calibration of reference blocks
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 12347-2025 Steel wire ropes—Fatigue testing method
Related Standards
GB/T 342-1997
Replaced
GB/T 342-1997 Dimension shape mass and tolerance for cold-drawn round square and hexagonal steel wires
MT 244.1-1997
Replaced
MT 244.1-1997 Car coupler of decauville for mine connecting chain
MT 244.2-1997
Replaced
MT 244.2-1997 Car coupler of decauville for mine—Connecting bolt
MT 716-1997
Replaced
MT 716-1997 Delivery requirements of wire ropes for mine hoisting
MT 717-1997
Active