GB/T 16762-1997
Replaced
GB/T 43357-2023
Active
National standards
GB/T 43357-2023 Test methods for general property of steel wire ropes
GB/T 43357-2023 Test methods for general property of steel wire ropes
Basic Information
Standard Code:
GB/T 43357-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wire, steel wire rope
ICS Name:
Wire, steel wire rope, and link chains
Publish Date:
2023-11-27
Implement Date:
2024-03-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国钢标准化技术委员会(SAC/TC 183)
Pages:
27 pages
Scope
本文件描述了钢丝绳直径及其均匀性、不圆度(椭圆度)、捻距、单位长度重量、表面质量、不松散性、平直度、平整度、残余扭转、钢丝绳破断拉力、拉伸断丝、规定力下总伸长率和断裂总伸长率、弹性伸长率和结构伸长率、实际弹性模量、弯曲疲劳、旋转性能、径向刚度、盐雾试验、钢丝绳和股含油率、绳芯含油率、绳芯回潮率、股间隙率、股成形率、股伸缩量、拆股钢丝直径、拉伸、扭转、反复弯曲、缠绕、维氏硬度、镀层质量、镀层附着性、镀层均匀性、锌铝合金镀层铝含量的检查、测量和试验方法。本文件适用于各种钢丝绳产品相关性能的检查、测量和试验。
Development Information
Drafting Units:
中钢集团郑州金属制品研究院股份有限公司(国家金属制品质量检验检测中心)、海城正昌工业有限公司、江苏赛福天钢索股份有限公司、国家钢丝绳产品质量检验检测中心(南通市产品质量监督检验所)、贵州钢绳股份有限公司、巨力索具股份有限公司、咸阳宝石钢管钢绳有限公司、江苏荣鑫通用设备有限公司、山东舒博特智能科技有限公司、冶金工业信息标准研究院
Drafting Persons:
张平萍、张钫、任翠英、陈延菘、杨帆、杨岳民、陈建豪、吴丽、杨超、闫保国、戴纪荣、杨海鹏、王玲君、冷明鉴、何岩、费刚、高正凯、罗念、崔海静、沈志军、戴敏、程晓亮、林柱英、苏頔瑶
Referenced Standards
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 238-2002 Metallic materials—Wire—Reverse bend test
GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 239.1-2012 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 239.1-2023 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2972-1991 Zinc-coated steel wire—Test method for uniformity of zinc coating on wire by the copper sulphate dip
GB/T 2972-2016 Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip
GB 2976-1988 Metallic materials—Wire—Wrapping test
GB/T 2976-2004 Metallic materials—Wire—Wrapping test
GB/T 2976-2020 Metallic materials—Wire—Wrapping test
GB/T 4340.2-1999 Metallic vickers hardness test—Part 2:Verification of hardness testers
GB/T 4340.2-2012 Metallic materials—Vickers hardness test—Part 2:Verification and calibration of testing machines
GB/T 4340.3-1999 Metallic vickers hardness test—Part 3:Calibration of hardness reference blocks
GB/T 4340.3-2012 Metallic materials—Vickers hardness test—Part 3:Calibration of reference blocks
GB/T 8358-1987 Method of breaking tensile test for steel wire ropes
GB/T 8358-2006 Method of breaking tensile test for steel wire ropes
GB/T 8358-2014 Steel wire ropes—Determination of measured breaking force
GB/T 8358-2023 Steel wire ropes—Determination of breaking force
GB/T 8706-1988 Steel wire ropes—Terminology
GB/T 8706-2006 Steel wire ropes—Vocabulary, designation and classification
GB/T 8706-2017 Steel wire ropes—Vocabulary,designation and classification
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 12160-2002 Calibration of extensometers used in uniaxial testing
GB/T 12160-2019 Metallic materials—Calibration of extensometers systems used in uniaxial testing
GB/T 12347-1996 Steel wire rope—Bending fatigue testing
GB/T 12347-2008 Steel wire ropes—Bending fatigue testing
GB/T 16825.1-2002 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Calibration and verification of the force-measuring system
GB/T 21965-2008 Steel wire ropes—Vocabulary for acceptance and defect
GB/T 21965-2020 Steel wire ropes—Vocabulary for acceptance and defect
GB/T 40342-2021 Method for determination of aluminum content in hot dipped zinc-aluminum alloy coating on steel wire
YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy
YB/T 081-2013 Metallurgical technology standards for numerical rounding and determination of testing values
YB/T 4182-2008 The method for measuring the oil content of steel wire rope
YB/T 4288-2012 Elevator steel wire rope bending fatigue test method
YB/T 4933-2021 Elevator steel wire - Vickers hardness test method
GB/T 4340.2-2025 Metallic materials—Vickers hardness test—Part 2:Verification and calibration of testing machines
GB/T 4340.3-2025 Metallic materials—Vickers hardness test—Part 3:Calibration of reference blocks
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 12347-2025 Steel wire ropes—Fatigue testing method
Related Standards
GB/T 342-1997
Replaced
GB/T 342-1997 Dimension shape mass and tolerance for cold-drawn round square and hexagonal steel wires
MT 244.1-1997
Replaced
MT 244.1-1997 Car coupler of decauville for mine connecting chain
MT 244.2-1997
Replaced
MT 244.2-1997 Car coupler of decauville for mine—Connecting bolt
MT 716-1997
Replaced
MT 716-1997 Delivery requirements of wire ropes for mine hoisting
MT 717-1997
Active