T/CUPTA 002-2020 The major respiratory infectious disease prevention and control specifications for network taxi booking platforms
T/CUPTA 002-2020 The major respiratory infectious disease prevention and control specifications for network taxi booking platforms
Basic Information
Scope
Scope: This standard specifies the requirements for online ride-hailing platform companies in China regarding the prevention and control of major respiratory infectious diseases, covering overall requirements, driver management, vehicle management, operational safeguards, and emergency response. This standard applies to the prevention and control of major respiratory infectious diseases in online ride-hailing platforms in China. When the prevention and control measures for different types and levels of infectious diseases conflict with this standard, the official national prevention and control measures shall prevail. Main technical content: (1) Driver management. The driver management guidelines in this standard are regulated from three aspects: temperature measurement, mask wearing, and hand hygiene. - Temperature measurement guidelines: Drivers should measure their temperature once before starting work and once after finishing work each day, and report the pre-work temperature to the platform company. If the temperature exceeds 37.3°C, they should stop driving. If any abnormalities occur, they should report them to the platform company immediately. - Mask wearing guidelines: Drivers are required to wear masks during operations, replace them regularly, and properly dispose of used masks. - Hand hygiene guidelines: Drivers should wear protective gloves during operations and disinfect them according to the seven-step hand-washing method. (2) Vehicle management. The vehicle management guidelines in this standard are regulated from four aspects: vehicle disinfection, vehicle ventilation, protective devices, and vehicle hygiene. - Vehicle disinfection guidelines: Implement the division of control levels by regions and grades in the transportation sector, and specify the disinfection requirements and frequencies for key areas and parts of vehicles in corresponding regions and grades. Also, specify the selection of disinfectants, disinfection methods, disin