T/ZALI 0008-2019 Active Group standards

T/ZALI 0008-2019 Double-ended Integrated LED Lamp - Performance Requirements

T/ZALI 0008-2019

Publish Date: 2019-08-15 Implement Date: 2019-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/ZALI 0008-2019

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Electric light source products

ICS Name: Electric lighting system

Publish Date: 2019-08-15

Implement Date: 2019-09-01

Scope

Scope: This standard specifies the terms and definitions, classification and naming, requirements, test methods, and inspection rules for two-ended integrated LED lamps used in general lighting, with G5 or G13 lamp heads, and in lamps with G5 or G13 sockets without ballasts. Applicable scope is as follows: - Rated power not exceeding 60 W; - Rated voltage AC 220V, frequency 50 Hz; - Nominal length not exceeding 1,500 mm; - Beam angle not less than 120°; - Power input method is single-ended wiring. This standard also includes requirements for modified two-ended integrated LED lamps that have the ballast disconnected. Two-ended integrated LED lamps are not suitable for lamps containing fluorescent lamps, inductors, or electronic control devices, unless the lamps are modified. Note 1: Unless otherwise specified as other types of lamps, the term "lamp" in this standard refers to "two-ended integrated LED lamps". Note 2: The rated voltage is the power supply voltage of the lamp. Any lamp that meets the requirements of this standard should be able to start and operate normally under the conditions of 92% to 106% of the rated power supply voltage or within the nominal operating voltage range, with an ambient temperature between -20°C and 45°C. Main technical content: It specifies the terms and definitions, classification and naming, requirements, test methods, and inspection rules for two-ended integrated LED lamps used in general lighting, with G5 or G13 lamp heads, and in lamps with G5 or G13 sockets without ballasts.