Standards

YBB 00142005-2015 Active

YBB 00142005-2015 Foil Laminated Closure Liners (PET/Al/PET) for Pharmaceutical Packaging

This standard applies to sealing gaskets made from a composite film of polyester/aluminum/polyester and cardboard, which are sealed by heat-sealing them onto the mouth of an oral solid medicine polyester bottle to achieve the purpose of sealing

Publish Date: 2015-08-11

YBB 00112005-2015 Active

YBB 00112005-2015 5-layer Co-extrusion Film ( I ) and Bag for Infusion

The five-layer co-extruded film of ester copolymer/ethylene methacrylate polymer/polyethylene/polyethylene/modified ethylene-propylene polymer refers to a five-layer infusion film formed by co-extrusion without the use of adhesives.

Publish Date: 2015-08-11

YBB 00132005-2015 Active

YBB 00132005-2015 Foil Laminated Closure Liners (PET/AI/PP) for Pharmaceutical Packaging

This standard applies to sealing gaskets made from a composite film of polyester/aluminum/polypropylene and cardboard, which are sealed by heat-sealing them to the mouth of an oral solid pharmaceutical polypropylene bottle to achieve the purpose of sealing

Publish Date: 2015-08-11

YBB 00212003-2015 Active

YBB 00212003-2015 Test for Coefficient of Linear Thermal Expansion

This method is applicable to the determination of the linear thermal expansion coefficient of pharmaceutical glass containers with compositions similar to those of standard glass

Publish Date: 2015-08-11

YBB 00232003-2015 Active

YBB 00232003-2015 Determination of Boron Oxide

This method is applicable to the determination of the content of boron trioxide in various pharmaceutical glass packaging materials. The method involves grinding and drying the test sample, melting it with alkali, and decomposing it with acid. Calcium carbonate is then added to form calcium borate, which is easily soluble in water and can be separated from other impurities. Mannitol is added to quantitatively convert the borate into alcohol borate. Phenolphthalein is used as an indicator, and the borate is titrated with sodium hydroxide titrant. The content of boron trioxide is calculated based on the volume of sodium hydroxide titrant consumed.

Publish Date: 2015-08-11

YBB 00162005-2015 Active

YBB 00162005-2015 Ceramic Bottles for Oral Solid Preparation

This standard is applicable to oral solid pharmaceutical ceramic bottles

Publish Date: 2015-08-11

YBB 00142003-2015 Active

YBB 00142003-2015 Determination of Vinyl Chloride Monomer

This standard is applicable to the determination of residual vinyl chloride monomer in polyvinyl chloride products.

Publish Date: 2015-08-11

YBB 00242004-2015 Active

YBB 00242004-2015 Combinational Closures of PP for Plastic Infusion Containers (with ring-pull)

This standard applies to polypropylene composite caps for plastic infusion containers. The composite caps consist of a pull-ring-style outer cap (mainly made of polypropylene), an inner cap (mainly made of polypropylene), and a gasket. The polyisoprene gasket in the composite cap should comply with the requirements of the Pharmaceutical Synthetic Polyisoprene Gasket (YBB00232004-2015).

Publish Date: 2015-08-11

YBB 00292004-2015 Active

YBB 00292004-2015 Test for Thermal Tensile Ratio

This method is suitable for determining the heat expansion rate of various pharmaceutical plastic tablets. The heat expansion rate refers to the change in the size of the sample after being subjected to a certain temperature for a certain period of time, expressed as the percentage of the change in the distance between the marks compared to the initial distance between the marks

Publish Date: 2015-08-11

YBB 00102002-2015 Active

YBB 00102002-2015 PET Bottles for Oral Liquid Preparation

This standard applies to plastic bottles used for oral liquid preparations, which are manufactured using the injection-blow molding process and are mainly made from polyethylene terephthalate (PET) as the main raw material

Publish Date: 2015-08-11

YBB 00382004-2015 Active

YBB 00382004-2015 Test for Impact Resistance

This law applies to the determination of the resistance to mechanical impact of all types of pharmaceutical glass containers

Publish Date: 2015-08-11

YBB 00132003-2015 Active

YBB 00132003-2015 Determination of Density

This method is applicable to the determination of the density of plastic containers (materials) other than foamed plastics. This standard adopts the immersion method, that is, the density is determined according to the buoyancy method

Publish Date: 2015-08-11