T/LSSWX 001-2023 Active

Main Technical Content: Passenger Elevator Car Management Standards 1 Scope This document specifies the requirements for the car doors, car walls, ceiling, floor, lighting, ventilation, car control panels, signage, IoT smart control, decoration use requirements, advertising placement, cleaning and maintenance, and supervision and management of passenger elevator cars. This document applies to the management of passenger elevator cars. 2 Normative Reference Documents This document does not have any normative reference documents. 3 Terms and Definitions There are no terms or definitions that need to be defined in this document. 4 Car Doors The car doors should operate normally, without abnormal noise or obvious shaking. The elevator anti-pinch protection device should function effectively, and the light curtain should be clean and free from dust. The warning signs should be complete and intact. 5 Car Walls, Ceiling, and Floor The car walls, ceiling, and floor should be clean and tidy. There should be no rust or obvious deformation on the car walls. The car ceiling and floor should be free from damage. 6 Lighting The lighting color should be consistent and moderate, and the lampshades and light fixtures should be free from damage. 7 Ventilation The car ventilation fans should operate normally without abnormal noise. If the car is equipped with air conditioning, there should be no abnormal noise or water leakage. 8 Car Control Panels The car floor display should function normally. The command buttons and indicator lights should be normal and effective. The emergency alarm device should have clear markings, function normally, and provide clear and interference-free calls. The maintenance door of the control panel should be in a locked state. 9 Signage "Elevator Safety Precautions" and "Special Equipment Use Marks" should be posted in the car, preferably on both sides of the car doors, with the lower edge at least 1.5m above the ground.