T/CI 022-2023

Scope: This document specifies the terms and definitions, basic parameters and models, requirements, test methods, user manuals, and product certificates for digital bookbinding machines used in office applications, as well as inspection rules, marking, packaging, transportation, and storage. This document applies to digital bookbinding machines (hereinafter referred to as "bookbinding machines") that are used to bind books with hot melt adhesive in various specifications and small batches during post-printing processing. This document is applicable to the digital printing industry. Main technical content: **5 Requirements** 5.1 General Requirements The bookbinding machines shall comply with the provisions of this document and shall be manufactured in accordance with the drawings and technical documents approved by the prescribed procedures. The control system shall be able to automatically detect the thickness of the book block. When there is no bookbinding operation for 30 minutes, the control system shall ensure that the glue tank is in an automatic insulation standby state. 5.2 Appearance Quality The exposed processing surfaces shall not have rust, bumps, scratches, or other defects that affect quality. The exposed non-processing surfaces shall not have protrusions, depressions, or pores that affect quality. The electroplated surfaces of exposed parts shall be smooth, uniform, and flat, without bubbles, delamination, or pitting. The spray-painted and painted layers shall be firm, smooth, and consistent in gloss. The outer surfaces shall not have obvious protruding particles, adhesive residue, uneven or rough surfaces, sandpaper marks, drip marks, bubbles, whitening, or loss of gloss. All wiring shall be compactly arranged, neatly organized, and firmly fixed, without friction or collisions with other moving parts. All labels and stickers shall be complete, correct, and neat. 5.3 Assembly Quality When the front and rear clamping plates of the boo