T/SZZL 017-2024 Active

Main Technical Content: 4.1 General Provisions 4.1.1 High-flow drainage and rescue vehicles shall comply with the requirements of this standard and be manufactured in accordance with the product drawings and technical documents approved through the prescribed procedures. 4.1.2 All external components and purchased parts of high-flow drainage and rescue vehicles shall comply with the relevant standards and be approved after passing factory inspections. 4.2 Complete Vehicles 4.2.1 The operational safety technology of high-flow drainage and rescue vehicles shall comply with the provisions of GB 7258. 4.2.2 The external dimensions, axle loads, and mass limits of high-flow drainage and rescue vehicles shall comply with the provisions of GB 1589. 4.2.3 The installation of external lighting and optical signaling devices on high-flow drainage and rescue vehicles shall comply with the provisions of GB 7258 and GB 4785. 4.2.4 The vehicle installation requirements for the anti-splash system on high-flow drainage and rescue vehicles shall comply with the provisions of GB 34659. 4.2.5 The installation of rearview mirrors on high-flow drainage and rescue vehicles shall comply with the provisions of GB 15084. 4.2.6 The requirements for side and rear under-body protection on high-flow drainage and rescue vehicles shall comply with the provisions of GB 11567. 4.2.7 The number plate board on high-flow drainage and rescue vehicles shall comply with the provisions of GB 15741. 4.2.8 The braking system of high-flow drainage and rescue vehicles shall comply with the provisions of GB 7258. 4.2.9 The welding quality of high-flow drainage and rescue vehicles shall comply with the provisions of JB/T 5943. 4.2.10 The painting quality of high-flow drainage and rescue vehicles shall comply with the provisions of QC/T 484. 4.2.11 The vehicle and component markings on high-flow drainage and rescue vehicles shall comply with the provisions of GB 30509. 4.2.12 The e