T/CNFPIA 3005-2019 Sawn Balsawood Plank (woodworking)

Scope

Scope: This standard specifies the terms and definitions, classification, technical requirements, measurement and testing methods, inspection methods, packaging, transportation, and storage of eucalyptus rotary veneer for plywood production. This standard applies to eucalyptus rotary veneer used in products such as ordinary plywood, ordinary fine woodwork boards, non-structural veneer laminates (LVL), and reconstituted wood. Main technical content: 3. Terms and definitions: - The terms and definitions defined in GB/T 18259-2009 and GB/T 155-2017, as well as the following terms and definitions, apply to this document. 3.1 Eucalyptus rotary veneer: Single-ply wood made from eucalyptus by rotary cutting method. 4. Classification: 4.1 Classification by application: a) Surface boards, including: --- --- b) Inner veneers, including: --- --- 5. Technical requirements: 5.1 Specifications and tolerances 5.1.1 Specifications dimensions according to Table 1 Table 1: Specifications dimensions Unit: mm Width Length Thickness 480 630 850 960 1270 960 1270 1930 2235 2540 1.0 ~ 3.5 Note: Special dimensions are subject to agreement between the supplier and the buyer. 5.1.2 Length and width tolerances: Width tolerance: 0–+10 mm; Length tolerance: 0–+10 mm. 5.1.3 Thickness tolerance: According to Table 2 Table 2: Thickness tolerances Thickness/t Inner veneer tolerance Inter-veneer tolerance t≤1.5 mm ±0.05 mm ±0.1 mm 1.5 mm

Development Information

Related Standards