GB/T 6609.10-2004
Active
YS/T 1106-2016
Active
Industry standards-Non-ferrous metals
YS/T 1106-2016 The technical conditions of carbon block processing device used in the production of aluminium
YS/T 1106-2016 The technical conditions of carbon block processing device used in the production of aluminium
Basic Information
Standard Code:
YS/T 1106-2016
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Carbon materials
ICS Name:
Materials used in aluminum production
Publish Date:
2016-04-05
Implement Date:
2016-09-01
Pages:
11 pages
Scope
This standard specifies the basic requirements for the design, manufacture, and acceptance of aluminum charcoal briquettes sample processing devices.
This standard applies to aluminum charcoal briquettes sample processing devices (hereinafter referred to as "devices"). Graphite charcoal briquettes processing devices can also refer to this standard.
Development Information
Referenced Standards
GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 6388-1986 Transport package shipping mark
GB/T 6576-2002 Machine tools—Lubrication systems
GB/T 7932-2003 Pneumatic fluid power—General rules relating to systems
GB/T 7932-2017 Pneumatic fluid power—General rules and safety requirements for systems and their components
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB 15760-1995 Metal-cutting machine tools—General safeguarding specification
GB 15760-2004 Metal-cutting machine tools—General safeguarding specification
GB/T 16462.1-2007 Test conditions for numerically controlled turning machines and turning centres—Part 1:Geometric test for machines with a horizontal workholding spindle
GB/T 16462.1-2023 Test conditions for numerically controlled turning machines and turning centres—Part 1:Geometric tests for machines with horizontal workholding spindle
GB/T 23570-2009 Welding parts for metal cutting machines—General specifications
GB/T 23573-2009 Metal cutting machine tools—Determination method of dust concentration
GB/T 25373-2010 Metal-cutting machine tools—General specifications of assembling
GB/T 25376-2010 Metal-cutting machine tools—General specifications of machining parts
JB/T 4136.2-2017 Instrument lathe - Part 2: Thread type spindle end dimensions
JB/T 6609-2021 Machine tool parts steel and heat treatment
JB/T 4136.2-1999 Instrument horizontal lathe precision inspection
JB/T 6609-1993 Machine tool parts steel and heat treatment
JB/T 7134.1-1993 Metal cutting machine gray iron casting looseness level evaluation
JB/T 6609-2008 Steel and heat treatment for metal-cutting machine tools parts
GB 15760-2025 Metal cutting machines—General specifications for safeguarding
Related Standards
GB/T 6609.11-2004
Active
GB/T 6609.11-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of manganous oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.1-2004
Replaced
GB/T 6609.1-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of moisture-Gravimetric method
GB/T 6609.12-2004
Replaced
GB/T 6609.12-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of zinc oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.13-2004
Active
GB/T 6609.13-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of calcium oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.14-2004
Active