GB/T 3956-1997
Replaced
T/JXTX 0013-2025
Active
Group standards
T/JXTX 0013-2025 180-grade straight-welded polyurethane enameled copper flat wire
T/JXTX 0013-2025 180-level direct-weld polyurethane lacquered copper flat wire
Price:
$ 20.00
Basic Information
Standard Code:
T/JXTX 0013-2025
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
-
ICS Name:
Comprehensive overview of wires and cables
Publish Date:
2025-05-10
Implement Date:
2025-06-09
Scope
Main Technical Content: 1. Scope This document specifies the product code and representation method, technical requirements, test methods, inspection and acceptance rules, packaging, transportation, storage, accompanying documents, and order form content for 180-grade direct-welded polyurethane enameled copper flat wires. The "180 grade" indicates the thermal rating, requiring a minimum temperature index of 180°C and a thermal shock temperature of at least 200°C. This document applies to conductors with nominal dimensions within the following ranges: - Wide side dimensions: minimum 0.50 mm, maximum 7.00 mm; - Narrow side dimensions: minimum 0.08 mm, maximum 1.00 mm. This document includes Class 1 and Class 2 enamel thickness enameled copper flat wires and applies to all specifications of conductors (hereinafter referred to as "enameled copper flat wires"). 2. Normative Reference Documents The content of the following documents is an essential part of this document through normative reference. Among them, the referenced documents with a specified date apply only to the version corresponding to that date; the unspecified date referenced documents apply to the latest version (including all amendment sheets) of this document. - GB/T 4074.1 "Test Methods for Enameled Copper Flat Wires" Part 1: General Provisions - GB/T 4074.2 "Test Methods for Enameled Copper Flat Wires" Part 2: Dimensional Measurement - GB/T 4074.3 "Test Methods for Enameled Copper Flat Wires" Part 3: Mechanical Performance - GB/T 4074.4 "Test Methods for Enameled Copper Flat Wires" Part 4: Chemical Performance - GB/T 4074.5 "Test Methods for Enameled Copper Flat Wires" Part 5: Electrical Performance - GB/T 4074.6 "Test Methods for Enameled Copper Flat Wires" Part 6: Thermal Performance - GB/T 7095.1 "Enameled Copper Flat Wires" Part 1: General Provisions 3. Terms and Definitions 4. Product Code and Representation Methods 4.1 Code 4.2 Product Representation Methods
Development Information
Related Standards
GB/T 17650.1-1998
Replaced
GB/T 17650.1-1998 Test on gases evolved during combustion of materials from cables Part 1:Determination of the amount of halogen acid gas
GB/T 17650.2-1998
Replaced
GB/T 17650.2-1998 Test on gases evolved during combustion of materials from cables Part 2:Determination of degree of acidity of gases by measuring pH and conductivity
GB/T 17651.1-1998
Replaced
GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions Part 1:Test apparatus
GB/T 17651.2-1998
Replaced
GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions Part 2:Test procedure and requirements
GB/T 4074.1-1999
Replaced