GB/T 3143-1982
Active
YS/T 575.23-2021
Active
Industry standards-Non-ferrous metals
YS/T 575.23-2021 Method for chemical analysis of bauxite - Part 23: Determination of element content by X-ray fluorescence spectroscopy
YS/T 575.23-2021 Method for chemical analysis of bauxite - Part 23: Determination of element content by X-ray fluorescence spectroscopy
Basic Information
Standard Code:
YS/T 575.23-2021
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Metallurgical raw materials and auxiliary materials
ICS Name:
Chemical analysis
Publish Date:
2021-03-05
Implement Date:
2021-07-01
Scope
This document is applicable to the determination of the contents of aluminum oxide, silica, total iron (expressed as Fe2O3), titanium dioxide, potassium oxide, sodium oxide, calcium oxide, magnesium oxide, phosphorus pentoxide, manganese oxide, sulfur, vanadium, gallium, and zinc in bauxite ore.
Development Information
Same series standard
YS/T 575.19-2021 The Chemical Analysis Method for Bauxite Part 19: Determination of Ash Content by Weight Method
YS/T 575.20-2021 YS/T 575.20-2021 Methods for chemical analysis of bauxite - Part 20: Preparation of pre-dried sample
YS/T 575.22-2021 Alumina ore chemical analysis method - Part 22: Determination of moisture content - Weight method
YS/T 575.28-2021 Alumina ore chemical analysis method - Part 28: Determination of lithium oxide content - Flame atomic absorption spectrometry
Replace the following standards
Related Standards
GB/T 4472-1984
Replaced
GB/T 4472-1984 General rule for determination of density and relative density for chemical products
GB/T 4946-1985
Replaced
GB/T 4946-1985 Terms of gas chromatography
GB/T 5274-1985
Replaced
GB/T 5274-1985 Gas analysis—Preparation of calibration gas mixtures—Weighing methods
GB/T 5831-1986
Replaced
GB/T 5831-1986 Determination of trace oxygen in the gases—Colorimetric method
GB/T 5832.2-1986
Replaced