GB/T 8738-1988
Replaced
YS/T 229.3-2013
Active
Industry standards-Non-ferrous metals
YS/T 229.3-2013 Methods for chemical analysis of high pure lead—Part 3:Determination of antimony content—Atomic fluorescence spectrometry
YS/T 229.3-2013 Methods for chemical analysis of high pure lead—Part 3:Determination of antimony content—Atomic fluorescence spectrometry
Basic Information
Standard Code:
YS/T 229.3-2013
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Analysis methods for heavy metals and their alloys
ICS Name:
Lead, zinc, tin, and their alloys
Publish Date:
2013-10-17
Implement Date:
2014-03-01
Pages:
5 pages
Scope
This part of YS/T 229 specifies the method for determining the amount of antimony in high-purity lead.
This part is applicable to the determination of the amount of antimony in high-purity lead. The range of antimony content determination is 0.05×10-4% to 1.0×10-4% (by mass fraction).
Development Information
Same series standard
YS/T 229.1-2013 Methods for chemical analysis of high pure lead—Part 1:Determination of silver, copper, bismuth, aluminum, nickel, tin, magnesium and iron contents—Atomic emission spectrometer
YS/T 229.2-2013 Methods for chemical analysis of high pure lead—Part 2:Determination of arsenic content—Atomic fluorescence spectrometry
YS/T 229.4-2013 Chemical analysis methods for high purity lead—Part 4:Determination of trace impurity elements content—Glow discharge mass spectrometry
Replace the following standards
YS/T 229.3-1994
Related Standards
GB/T 1470-1988
Replaced
GB/T 1470-1988 Lead and lead-antimony alloy plate
GB/T 1471-1988
Active
GB/T 1471-1988 Lead plate for anode
GB/T 1472-1988
Replaced
GB/T 1472-1988 Lead and lead-antimony alloy tube
GB/T 1473-1988
Active
GB/T 1473-1988 Lead and lead-antimony alloy rod
GB/T 1474-1988
Active