GB/T 25338.2-2019 Active National standards

GB/T 25338.2-2019 Switch machines for railways—Part 2:Test methods

GB/T 25338.2-2019 Switch machines for railways—Part 2:Test methods

Publish Date: 2019-08-30 Implement Date: 2020-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25338.2-2019

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Signal equipment

ICS Name: Integrated Railway Engineering

Publish Date: 2019-08-30

Implement Date: 2020-03-01

Pages: 12 pages

Scope

This part of GB/T 25338 specifies the terminology, test conditions, and general test methods for electric turnouts, electro-hydraulic turnouts, and electro-pneumatic turnouts (hereinafter referred to as "turnouts").
This part is applicable to the testing of electric turnouts, electro-hydraulic turnouts, and electro-pneumatic turnouts.

Development Information

Word Count: 22 Thousand words Pages: 12 pages

Same series standard

GB/T 25338.1-2019 Switch machines for railways—Part 1:General specification

Replace the following standards

GB/T 25338.2-2010 Switch machine for railway—Part 2:Test methods

Referenced Standards

GB/T 2408-2008 Plastics—Determination of burning characteristics—Horizontal and vertical test GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.16-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test J and guidance:Mold growth GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined(IP code)—Classification GB/T 5171.21-2016 Small power motors—Part 21:General test methods GB/T 25338.1-2019 Switch machines for railways—Part 1:General specification

Related Standards

GB 146.1-1983 Replaced

GB 146.1-1983 Rolling stock gauge for standard gauge railways

Publish Date: 1983-11-07

GB 12758-1991 Abolished

GB 12758-1991 Signal system for subway—General specification

Publish Date: 1991-03-26

GB/T 13669-1992 Active

GB/T 13669-1992 The limite of noise emitted by railbound locomotives

Publish Date: 1992-09-22

GB/T 15836.1-1995 Abolished

GB/T 15836.1-1995 Technical requirements and testing methods for 450MHz same-frequency simplex train radio dispatching communication equipment locomotive station

Publish Date: 1995-12-13

GB/T 15836.2-1995 Abolished

GB/T 15836.2-1995 Technical requirements and testing methods for 450MHz same-frequency simplex train radio dispatching communication equipment station radio set

Publish Date: 1995-12-13

GB/T 7178.1-1996 Replaced

GB/T 7178.1-1996 The operating standard for railway shunting Railway shunting basic regulations for the operating standard

Publish Date: 1996-03-15