GB 13539.4-1992
Replaced
GB/Z 22202-2008
Replaced
National standards
GB/Z 22202-2008 Reliability test method of residual current operated circuit-breakers for household and similar uses
GB/Z 22202-2008 Reliability test method of residual current operated circuit-breakers for household and similar uses
Basic Information
Standard Code:
GB/Z 22202-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Low-voltage distribution electrical equipment
ICS Name:
Fuses and other overload protection devices
Publish Date:
2008-07-16
Implement Date:
2009-04-01
Pages:
15 pages
Scope
This guidance technical document specifies the general requirements for reliability verification tests of residual current operated circuit breakers for household and similar applications, including reliability indicators, reliability grades, reliability test conditions, reliability test plans, and reliability test procedures for residual current operated circuit breakers for household and similar applications. This guidance technical document is applicable to products that comply with the standards of GB 16916.1—2003 or GB 16917.1—2003, and can be used as a guidance document for manufacturers to establish reliability indicators and test methods for residual current operated circuit breakers for household and similar applications. The reliability grades and test methods for residual current circuit breakers that comply with standards such as GB 14048.2 can also refer to the relevant content of this guidance technical document.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
GB/T 2424.2-2005 Environment tests for electric and electronic products—Guidance for damp heat tests
GB/T 2900.18-2008 Electrotechnical terminology—Low voltage apparatus
GB/T 3187-1994 Reliability and maintainability terms
GB 6829-1995 General requirements for residual current operated protective devices
GB 16916.1-2003 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCB)—Part 1:General rules
GB 16917.1-2003 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBO) Part 1:General rules
GB/T 5080.1-1986 Equipment reliability testing—General requirements
GB/T 5080.1-2012 Reliability testing—Part 1:Test conditions and statistical test principles
GB/T 5080.2-1986 Equipment reliability testing—Guidance for the design of test cycles
GB/T 5080.2-2012 Reliability testing—Part 2:Design of test cycles
GB/T 5080.4-1985 Equipment reliability testing—Procedure for point estimates and confidence intervals from reliability determination tests(Exponental distribution)
GB/T 5080.5-1985 Equipment reliability testing—compliance test plans for success ratio
GB/T 5080.6-1996 Equipment reliability testing—Tests for the validity of a constant failure rate assumption
GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate
Related Standards
GB 13955-1992
Replaced
GB 13955-1992 Installation and operation of residual current operated protective devices
GB 14285-1993
Replaced
GB 14285-1993 Technical code for relaying protection and security automatic equipment
GB 14287-1993
Replaced
GB 14287-1993 Residual current operated alarm devices for fire prevention
GB 15166.2-1994
Replaced
GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses
GB 15166.3-1994
Replaced