GB/T 2804-1981
Replaced
GB/T 5900.1-2008
Replaced
National standards
GB/T 5900.1-2008 Machine tools—Connecting dimensions of spindle noses and work holding chucks—Part 1:Conical connection
GB/T 5900.1-2008 Machine tools—Connecting dimensions of spindle noses and work holding chucks—Part 1:Conical connection
Basic Information
Standard Code:
GB/T 5900.1-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nMetal cutting machine tools
ICS Name:
The indexing and tool/workpiece clamping devices
Publish Date:
2008-08-11
Implement Date:
2009-02-01
Pages:
11 pages
Scope
This section specifies the interchangeability dimensions between the tapered end of the lathe spindle (Type A) and the corresponding connecting surfaces of the chuck or collet.
Development Information
Replace the following standards
Superseded by the following standards
Adopt standards
ISO 702-1:2001
Related Standards
GB/T 14661-1993
Replaced
GB/T 14661-1993 Type A cartridges for indexable inserts
GB/T 2554.1-1998
Replaced
GB/T 2554.1-1998 Mechanical dividing heads—Testing of accuracy
GB/T 2554.2-1998
Replaced
GB/T 2554.2-1998 Mechanical dividing heads—Classifications and technical specifications
GB/T 3837-2001
Active
GB/T 3837-2001 7/24 tapers for tool shanks for manual changing
GB/T 4346.1-2002
Replaced