GB/T 18244-2000
Replaced
T/SZWA 002-2019
Active
Group standards
T/SZWA 002-2019 Polymer Epsomite Application Technical Regulations
T/SZWA 002-2019 Polymer Epsomite Application Technical Regulations
Price:
$ 20.00
Basic Information
Standard Code:
T/SZWA 002-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
-
ICS Name:
Waterproof
Publish Date:
2019-12-15
Implement Date:
2020-01-01
Scope
Scope: This specification is formulated to implement the technical and economic policies of Shenzhen City in the construction field, improve the quality of construction projects, standardize the application of polymer-based grout in construction projects, and ensure that the technology is advanced, economically reasonable, and safe. This specification applies to the design, construction, and quality acceptance of polymer-based grout. In addition to complying with this specification, the construction and quality acceptance of polymer-based grout shall also comply with the provisions of the current national standards and the local construction and acceptance specifications of Shenzhen City. Main technical contents: 1. Polymer-based grout is suitable for waterproofing and tile adhesion in construction projects. 2. Polymer-based grout can be used for waterproofing the interior and exterior walls, basements, and bathrooms of buildings. 3. Polymer-based grout can be used for waterproofing the facing and back sides of underground structures such as tunnels and reservoirs. 4. The selection of polymer-based grout varieties and models shall be determined according to the requirements of design and construction, etc. Different varieties and models of polymer-based grout shall not be mixed together. 5. Before the construction of polymer-based grout, the construction unit shall prepare a construction plan according to the design and engineering requirements and the product specification, and shall carry out the construction according to the construction plan. 6. The construction unit shall establish a self-inspection, mutual inspection, and professional inspection system for each process, and shall have complete construction inspection records. 7. The tensile bond strength between the various structural layers under the exterior wall decorative layer shall not be less than 0.4MPa. 8. Before the construction, the construction unit shall, together with the material suppliers an
Development Information
Related Standards
GB/T 19889.7-2005
Replaced
GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
GB/T 19889.1-2005
Replaced
GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005
Abolished
GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data
GB/T 19889.3-2005
Replaced
GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements
GB/T 19889.4-2005
Replaced