T/FSQX 002-2021 Hydraulic reciprocating hydrogen compressor
T/FSQX 002-2021 Hydraulic reciprocating hydrogen compressor
Basic Information
Scope
Scope: This document specifies the terms and definitions, models and basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of hydraulic reciprocating hydrogen compressors (hereinafter referred to as "hydrogen compressors"). This document applies to hydraulic reciprocating hydrogen compressors using hydrogen as the medium, with a rated exhaust pressure not exceeding 90 MPa and a drive motor power not exceeding 110 kW, intended for use in hydrogenation substations. Main technical content: The basic parameters of the hydrogen compressor shall comply with Table 1. The gas source is a hydrogen long-tube trailer (with an intake pressure range of 5–20 MPa), and the exhaust pressures are 45 MPa and 90 MPa. If the purchaser has special requirements, they shall follow the provisions of the agreement or contract between the parties. 5.2.1 The actual volume flow measured under specified operating conditions of the hydrogen compressor, converted to standard conditions (0 °C, 0.1013 MPa absolute pressure), shall not be less than 95% of the value specified in Table 1. 5.2.2 The noise power level of the hydrogen compressor shall not exceed the value specified in Table 2. Table 2: Noise Indicators of Hydrogen Compressors Drive Motor Nominal Power (kW) Noise Power Level (dB(A)) Pe ≤ 45 85 45 < Pe ≤ 90 90 90 < Pe ≤ 110 95 5.2.3 The vibration intensity of the hydrogen compressor shall comply with the provisions of GB/T