FZ/T 54036-2011
Active
Industry standards-Textiles
FZ/T 54036-2011 High elongation and heat resistance polyamide/cotton core spun yarn
FZ/T 54036-2011 High elongation and heat resistance polyamide/cotton core spun yarn
Basic Information
Standard Code:
FZ/T 54036-2011
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Chemical fibers
ICS Name:
Artificial fibers
Publish Date:
2011-05-18
Implement Date:
2011-08-01
Pages:
11 pages
Scope
This standard specifies the terms and definitions, classification and marking, technical requirements, test methods, inspection rules and marking, packaging, transportation, and storage requirements for high-elongation heat-resistant nylon/cotton core yarn.
This standard applies to the quality inspection of high-elongation heat-resistant nylon/cotton core yarn, which is made from nylon 66 filament and cotton strips and is used as the weft yarn for curtain cloth. The core yarn contains 50% to 65% nylon 66 filament and is available in rolls with specifications of 22 tex to 32 tex. Other similar products can be used as reference for application.
Development Information
Referenced Standards
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 4743-1995 Textiles—Yarn from packages—Determination of linear density (mass per unit length) by the skein method
GB/T 2910.7-2009 Textiles—Quantitative chemical analysis—Part 7:Mixtures of polyamide and certain other fibres(method using formic acid)
GB/T 3291.1-1997 Textiles—Terms of textiles material properties and test—Part 1:Fibre and yarn
GB/T 3291.3-1997 Textiles—Terms of textiles material properties and test—Part 3:General
GB/T 3916-1997 Textiles—Yarns from packages—Determination of single-end breaking force and elongation at break
GB/T 3916-2013 Textiles—Yarns from packages—Determination of single-end breaking force and elongation at break using constant rate of extension(CRE) tester
GB/T 4146.1-2009 Textiles—Man-made fibres—Part 1:Generic names
GB/T 4146.1-2020 Textiles—Man-made fibres—Part 1:Generic names
GB/T 6502-2001 Sampling method for synthetic filament yarns
GB/T 6502-2008 Sampling method of man-made filament yarns
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9995-1997 Determination of moisture content and moisture regain of textile—Oven-drying method
GB/T 2910.7-2025 Textiles—Quantitative chemical analysis—Part 7:Mixtures of polyamide with certain other fibers(method using formic acid)
Related Standards
GB/T 4146-1984
Replaced
GB/T 6509-1986
Replaced
GB/T 6509-1986 Method for determination of low molecular weight compounds content in polyamide 6
GB/T 9997-1988
Replaced
GB/T 9997-1988 Man-made fibres—Determination of breaking strength and elongation of individual fibres
GB/T 14334-1993
Replaced
GB/T 14334-1993 Sampling method of synthetic staple fibres
GB/T 14335-1993
Replaced
GB/T 14335-1993 Testing method for linear density of synthetic staple fibres
GB/T 14336-1993
Replaced