GB/T 6609.10-2004
Active
YS/T 587.5-2006
Abolished
Industry standards-Non-ferrous metals
YS/T 587.5-2006 Calcined coke for prebaked blocks—Testing methods—Part 5:Determination of trace metals
YS/T 587.5-2006 Calcined coke for prebaked blocks—Testing methods—Part 5:Determination of trace metals
Basic Information
Standard Code:
YS/T 587.5-2006
Standard Type:
Industry standards
Standard Status:
Abolished
is_force_gb:
no
CCS Name:
Carbon materials
ICS Name:
Materials used in aluminum production
Publish Date:
2006-05-25
Implement Date:
2006-12-01
Pages:
8 pages
Scope
This part specifies the determination method of trace elements in calcined petroleum coke used for carbon anodes.
This part is applicable to the determination of trace elements in samples of calcined petroleum coke used for carbon anodes with a ash content (mass fraction) of less than 1%, and is also applicable to the determination of trace elements in petroleum coke, pre-baked anodes, and coal tar pitch. For elements with concentrations exceeding the upper limit of the detection range, the determination shall be carried out after appropriate dilution.
Development Information
Same series standard
YS/T 587.1-2006 Calcined coke for prebaked blocks—Testing methods—Part 1:Determination of ash content
YS/T 587.4-2006 Calcined coke for prebaked blocks—Testing methods—Part 3:Determination of sulfur content
YS/T 587.6-2006 Calcined coke for prebaked blocks—Testing methods—Part 6:Determination of electrical resistivity of granules
YS/T 587.7-2006 Calcined coke for prebaked blocks—Testing methods—Part 7:Determination of the reactivity to carbon dioxide
YS/T 587.8-2006 Calcined coke for prebaked blocks—Testing methods—Part 8:Determination of the reactivity to air
YS/T 587.9-2006 Calcined coke for prebaked blocks—Testing methods—Part 9:Determination of real density
YS/T 587.10-2006 Calcined coke for prebaked blocks—Testing methods—Part 10:Determination of bulk density(tapped)
YS/T 587.11-2006 Calcined coke for prebaked blocks—Testing methods—Part 11:Determination of grain stability
YS/T 587.12-2006 Calcined coke for prebaked blocks—Testing methods—Part 12:Determination of particle size distribution
Related Standards
GB/T 6609.11-2004
Active
GB/T 6609.11-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of manganous oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.1-2004
Replaced
GB/T 6609.1-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of moisture-Gravimetric method
GB/T 6609.12-2004
Replaced
GB/T 6609.12-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of zinc oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.13-2004
Active
GB/T 6609.13-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of calcium oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.14-2004
Active