GB/T 5849-1999
Replaced
LY/T 1658-2006
Replaced
Industry standards-Forestry
LY/T 1658-2006 Direct printing wood-based panel
LY/T 1658-2006 Direct printing wood-based panel
Basic Information
Standard Code:
LY/T 1658-2006
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Plywood
ICS Name:
\nWood-based boards
Publish Date:
2006-08-31
Implement Date:
2006-12-01
Pages:
17 pages
Scope
This standard specifies the definition, classification, technical requirements, inspection methods, inspection rules, and requirements for marking, packaging, storage, and transportation of directly printed plywood. This standard applies to products that are directly printed with patterns on the surface of plywood, and then decorated with nitrocellulose lacquer, polyurethane lacquer, light-curing unsaturated polyester resin (photosensitive) lacquer, etc. on the printed surface.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 4897.1-2003 Particleboard—Part 1:General requirements for all board types
GB/T 4897.3-2003 Particleboard—Part 3:Requirements for boards for interior fitments (including furniture) for use in dry conditions
GB/T 4897.4-2003 Particleboard—Part 4:Requirements for load-bearing boards for use in dry conditions
GB/T 4893.2-2005 Furniture—Assessment of surface resistance to wet heat
GB/T 4893.3-2005 Furniture—Assessment of surface resistance to dry heat
GB/T 9846.3-2004 Plywood—Part 3:General specification for plywood for general use
GB/T 9846.4-2004 Plywood—Part 4:Specification for classification by appearance of plywood for general use
GB/T 11718-1999 Medium density fibreboard
GB/T 17657-1999 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB 18580-2001 Indoor decorating and refurbishing materials—Limit of formaldehyde emission of wood based panels and finishing products
GB/T 19367.1-2003 Wood-based panels—Determination of thickness、width and length of boards
GB/T 19367.2-2003 Wood-based panels—Determination of squareness and straightness of boards
GB/T 4893.4-1985 Furniture--Assessment of adhesion of surface coatings--Cross cut
Adopt standards
DIN 68861:1981
DIN 51960:1975
ISO 2813:1994
Related Standards
LY/T 1611-2003
Replaced
LY/T 1611-2003 Fiberboard for flooring
LY/T 1070.1-2004
Replaced
LY/T 1070.1-2004 Unsaturated polyester resin decorative wood-based panel—Part 1:Specification
LY/T 1070.2-2004
Replaced
LY/T 1070.2-2004 Unsaturated polyester resin decorative wood-based panel—Part 2:Test method
GB/T 15102-2006
Replaced
GB/T 15102-2006 Surface decorated wood-based panels with paper impregnated thermosetting resins
GB/T 15104-2006
Replaced