T/CI 161-2022 Active Group standards

T/CI 161-2022 The voltage level of 200 V and 1,700 V insulated gate bipolar transistor (IGBT) driver

Publish Date: 2022-12-15 Implement Date: 2022-12-15 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/CI 161-2022

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Integrated Components of Semiconductor Devices

Publish Date: 2022-12-15

Implement Date: 2022-12-15

Scope

Scope: This document specifies the terms and definitions, abbreviations, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage for insulated gate bipolar transistor (IGBT) drivers with voltage ratings of 1,200 V and 1,700 V. This document is applicable to IGBT drivers (hereinafter referred to as "drivers") used in new energy, industrial control, and other fields with voltage ratings of 1,200 V and 1,700 V. Main technical content: 3.1 Opening delay: The time required for the input PWM signal of the driver to rise from 10% to the output signal at the gate rising edge. 3.2 Turn-off delay: The time required for the input PWM signal of the driver to fall from 90% to the output signal at the gate falling edge. 3.3 Rise time: The time required for the output signal at the gate of the driver to rise from 10% of the gate-off voltage (-15 V/-8 V) to 90% of the gate-on voltage (+15 V). 3.4 Fall time: The time required for the output signal at the gate of the driver to fall from 90% of the gate-on voltage (+15 V) to 10% of the gate-off voltage (-15 V/-8 V). 3.5 Fault signal holding time: The time during which the output signal of the driver's fault output terminal remains active after a fault occurs. 3.6 No-load current: The power supply current of each driver output under rated supply voltage and in a no-load condition. 3.7 Operating current: The power supply current of each driver output when it reaches full load under rated supply voltage. 3.8 VCE short-circuit protection response time: The time from the occurrence of a short circuit in the IGBT power device to the driver's execution of a shutdown command. 3.9 Blocking time: The time from the moment the SOx fault output reports a fault to the time the driver blocks the output voltage at the gate until it can respond to the PWM signal from the host computer. 4 Abbreviations The following abbreviations are applicable to this document: IGBT: Insulated Gate B