GB 6738-1986
Abolished
GB/T 17215.301-2007
Replaced
National standards
GB/T 17215.301-2007 Particular requirements for multi-function electricity meters
GB/T 17215.301-2007 Particular requirements for multi-function electricity meters
Basic Information
Standard Code:
GB/T 17215.301-2007
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nElectricity measurement and load control system
ICS Name:
The measurement of electrical and magnetic quantities
Publish Date:
2007-10-18
Implement Date:
2007-12-01
Pages:
28 pages
Scope
This part of GB/T 17215 specifies the terminology, technical requirements, test methods, inspection rules, marking, packaging, and storage of multi-functional electric energy meters (hereinafter referred to as meters). This part applies to stationary multi-functional electric energy meters installed and used in power grids with a rated frequency of 50 Hz (60 Hz). This part only applies to stationary electric energy measurement devices installed indoors and in meter boxes, functional components, and display meters encased in a meter case, including those with built-in current transformers. The metering performance of the meters shall comply with the requirements of the national standard for stationary electric energy meters of the corresponding grade index. If a measurement device measures multiple electrical parameters (such as current, voltage, frequency, apparent energy, power factor, phase, etc.) or is equipped with other functional components, it shall also comply with the national standards related to these electrical parameters and functional components.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB 4793.1-1995 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1:General requirements
GB/T 9092-1998 Time switch for tariff and load control
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 15284-2002 Particular requirements for multi-rate electricity meters
GB/T 15464-1995 General-purpose specification for the packaging of instrumentation products
GB/T 17215-2002 Alternating current static watt-hour meters for active energy(Classes 1 and 2)
GB/T 17215.211-2006 Electricity metering equipment(a.c.)—General requirements,tests and test conditions—Part 11:Metering equipment
GB/T 17441-1998 Symbols for alternating-current electricity meters
GB/T 18460.3-2001 Pre-payment vending system using integrated circuit(s) cards with contacts—Part 3:Pre-payment electricity meters
GB/T 19897.1-2005 Automatic meter reading system lower layer communication protocol—Part 1:direct local data exchange
IEC 61038:1998
GB/T 17882-1999 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
GB/T 17883-1999 Alternating current static watt-hour meters for active energy (classes 0.2S and 0.5S)
GB/T 19882.31-2007 Automatic meter reading system—Part 3-1:Application layer data exchange protocols—Object identification system
JB/T 50070-2002 Electricity meter reliability requirements and evaluation methods
Related Standards
GB/T 9393-1988
Replaced
GB/T 9393-1988 STZ3 type connector for electronic measurement instrument
GB/T 12114-1989
Replaced
GB/T 12114-1989 Generic specification of high frequency signal generators
GB/T 12115-1989
Replaced
GB/T 12115-1989 Measuring methods for high frequency signal generators
GB/T 12116-1989
Replaced
GB/T 12116-1989 Generic specification for electronic analog voltmeters
GB/T 12117-1989
Replaced