GB/T 4011-1983
Replaced
JG/T 538-2018
Active
Industry standards-The construction industry
JG/T 538-2018 Carbon-fiber heating cables in building
JG/T 538-2018 Carbon-fiber heating cables in building
Basic Information
Standard Code:
JG/T 538-2018
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Cables and their accessories
ICS Name:
Cable
Publish Date:
2018-05-30
Implement Date:
2018-12-01
Pages:
15 pages
Scope
This standard specifies the classification and marking, requirements, test methods, inspection rules, labeling, packaging, transportation, and storage of carbon fiber heating cables used in buildings. This standard applies to carbon fiber heating cable products with a rated voltage of 300/500 V used in low-temperature radiation heating systems in industrial and civil buildings.
Development Information
Referenced Standards
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 8808
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 4706.82-2007 Household and similar electrical appliances—Safety—Particular requirements for flexible sheet heating elements for room heating
GB 4706.82-2014 Household and similar electrical appliances—Safety—Particular requirements for flexible sheet heating elements for room heating
GB/T 4706.82-2024 Safety of household and similar electrical appliances—Part 82:Particular requirements for flexible sheet heating elements for room heating
GB/T 7287-2008 Test method of infrared heater
GB/T 7287.1-1987 Detecting method for size, shape and exterior of infrared heater
GB/T 7287.2-1987 Measuring method for the surface temperature distribution of infrared heater
GB/T 7287.3-1987 Measuring method for the radio between radiant surface and rear surface of infrared heater
GB/T 7287.4-1987 Measuring method for temperature rise time and fall time of infrared heater
GB/T 7287.5-1987 Testing method for bearing cold and hot alternation change of infrared heater
GB/T 7287.6-1987 Measuring method for insulation resistance of infrared heater
GB/T 7287.7-1987 Measuring method for electric-to-radiant power transfer efficiency of infrared heater
GB/T 7287.8-1987 Measuring method for power deviation rate of infrared heater
GB/T 7287.9-1987 Measuring method for normal total emittance of infrared heater
GB/T 7287.10-1987 Measuring method for normal spectral emittence of infrared heater
GB/T 7287.11-1987 Test method for lifetime of infrared heater
GB/T 7287.12-1987 Test method for vibration of infrared heater
GB/T 12666.2-2008 Test method on a single wire or cable under fire conditions—Part 2:Horizontal specimen flame test
GB/T 20841-2007 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
JGJ 142-2012 Technical specification for radiant heating and cooling
GB/T 20841-2025 Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation
Related Standards
GB/T 4012-1983
Replaced
GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use
GB/T 5441.10-1985
Replaced
GB/T 5441.10-1985 Test methods for communication cable—Measurement of actual length of coaxial pair—Sine wave method
GB/T 5441.1-1985
Replaced
GB/T 5441.1-1985 Test methods for communication cable General
GB/T 5441.2-1985
Replaced
GB/T 5441.2-1985 Test methods for communication cable Capacitance test Bridge method
GB/T 5441.3-1985
Replaced