GB/T 4011-1983
Replaced
GB/T 20841-2007
Replaced
National standards
GB/T 20841-2007 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
GB/T 20841-2007 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
Basic Information
Standard Code:
GB/T 20841-2007
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Cables and their accessories
ICS Name:
Cable
Publish Date:
2007-01-16
Implement Date:
2007-08-01
Pages:
32 pages
Scope
This standard applies to heating cables used in low temperatures, such as for heating living facilities and preventing ice formation. This standard applies to cables with a rated voltage of 300/500 V. Industrial heating cables will be specified in a separate standard. This standard only applies to cables and not to any other components of the heating system. This standard specifies the cable structure using one or multiple conductors, and recommends the combination of approved insulation and sheathing materials. Bare conductors and conductors with protective conductors with a supply voltage of 50 V or less are not included in the scope of this standard.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2951.1-1997 Common test methods for insulating and sheathing materials of electric cables—Part 1:Methods for general application—Section one:Measurement of thickness and overall dimensions—Tests for determining the mechanical properties
GB/T 2951.2-1997 Common test methods for insulating and sheathing materials of electric cables—Part 1:Methods for general application—Section two:Thermal ageing methods
GB/T 2951.3-1997 Common test methods for insulating and sheathing materials of electric cables—Part 1:Methods for general application—Section three:Methods for determining the density—Water absorption tests—Shrinkage test
GB/T 2951.4-1997 Common test methods for insulating and sheathing materials of electric cables—Part 1:Methods for general application—Section four:Test at low temperature
GB/T 2951.5-1997 Common test methods for insulating and sheathing materials of electric cables—Part 2:Methods specific to elastomeric compounds— Section one:Ozone resistance test—Hot set test—Mineral oil immersion test
GB/T 2951.6-1997 Common test methods for insulating and sheathing materials of electric cables Part 3:Methods specific to PVC compounds Section one:Pressure test at high temperature—Test for resistance to cracking
GB/T 2951.7-1997 Common test methods for insulating and sheathing materials of electric cables Part 3:Methods specific to PVC compounds Swction two:Loss of mass test—Thermal stability test
GB/T 13033.1-2007 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V—Part 1:Cables
IEC 60885-1:1987
GB/T 2900.10-2001 Electrotechnical vocabulary—Electric cables
GB/T 2900.10-2013 Electrotechnical terminology—Electric cables
GB/T 3956-1997 Conductors of insulated cables
GB/T 3956-2008 Conductors of insulated cables
GB/T 20637-2006 Electrical installations in ships—Shipboard power cables—General construction and test requirements
GB/T 20637-2025 Electrical installations in ships—General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
Adopt standards
IEC 60800:1992
Related Standards
GB/T 4012-1983
Replaced
GB/T 4012-1983 2.6/9.5mm composite coaxial cable for telecommunication use
GB/T 5441.10-1985
Replaced
GB/T 5441.10-1985 Test methods for communication cable—Measurement of actual length of coaxial pair—Sine wave method
GB/T 5441.1-1985
Replaced
GB/T 5441.1-1985 Test methods for communication cable General
GB/T 5441.2-1985
Replaced
GB/T 5441.2-1985 Test methods for communication cable Capacitance test Bridge method
GB/T 5441.3-1985
Replaced