T/CAPPD 2-2018 Multi-level industrial building accessibility guideline
T/CAPPD 2-2018 Multi-level industrial building accessibility guideline
Basic Information
Scope
Scope: This guide specifies the requirements for barrier-free construction and renovation of multi-story industrial buildings. This guide applies to multi-story industrial buildings. Other single-story and high-rise industrial buildings may refer to it for implementation. Main technical content: 1. The factory site of barrier-free multi-story industrial buildings shall meet the requirements of barrier-free design and comply with the convenience of building layout, barrier-free transportation, and site drainage. 2. The factory area of multi-story industrial buildings shall carry out barrier-free road design, barrier-free signage design, and barrier-free emergency evacuation design, and a barrier-free environment shall be built. 3. The pavements of pedestrian passages and barrier-free passages in the factory area of multi-story industrial buildings shall be flat, non-slip, and free from reflection. 4. In labor-intensive multi-story industrial building factory areas where the distance between production workshops and living rooms is greater than 500m, and the terrain slope is greater than 6%, seats or rest areas shall be set up every 500m. Barrier-free shuttle buses shall be set up according to barrier-free needs. 5. Multi-story industrial building factory areas shall have at least two barrier-free entrances. Factory entrances shall be connected to internal roads and barrier-free passages to facilitate barrier-free access, fire safety, and emergency evacuation. 6. Multi-story industrial buildings shall fully consider the barrier-free needs of people with mobility disabilities, hearing disabilities, and vision disabilities. 7. Falling objects from height shall be prevented, and sharp protruding objects shall be prohibited. The doors of production workshop entrances shall be barrier-free and spring doors shall not be used.