GB/T 17948.6-2007 Replaced National standards

GB/T 17948.6-2007 Rotating electrical machine—Functional evaluation of insulation systems—Test procedures for form-wound windings—Evaluation of thermomechanical endurance of insulation systems

Publish Date: 2007-12-03 Implement Date: 2008-05-20 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 17948.6-2007

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Rotating motor

ICS Name: Rotating motor comprehensive

Publish Date: 2007-12-03

Implement Date: 2008-05-20

Pages: 11 pages

Scope

This section specifies the test procedures for evaluating the thermal and mechanical durability of the insulation structure of a molded winding. In this evaluation, it is recommended to compare the performance of the insulation structure to be evaluated with that of a reference insulation structure that has been validated through operational experience.

Development Information

Word Count: 19 Thousand words Pages: 11 pages

Same series standard

GB/T 17948.5-2007 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Multifactor functional evaluation—Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50MVA and 15kV

Superseded by the following standards

GB/T 17948.6-2018 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Evaluation of thermomechanical endurance of insulation systems

Referenced Standards

GB 755-2000 Rotating electrical machines—Rating and performance GB/T 1408.1-1999 Methods of test for electric strength of solid insulating materials-Tests at power frequencies GB/T 7354-2003 Partial discharge measurements GB/T 17948-2003 Functional evaluation of insulation systems for rotating electrical machines—General guidelines GB/T 17948.4-2006 Functional evaluation of insulation systems for rotating electrical machines—Test procedures for form-wound windings—Electrical evaluation of insulation systems used in machines up to and including 50MVA and 15kV JB/T 10098-2000 JB/T 7608-1994 The test method and limit values for the dielectric loss tangent of the insulation medium of high-voltage alternating current motors' coils

Adopt standards

IEC 60034-18-34:2000

Related Standards

GB/T 7346-1998 Replaced

GB/T 7346-1998 Basic outline constructional type for control motors and feedback components

Publish Date: 1998-01-19

GB/T 4772.1-1999 Replaced

GB/T 4772.1-1999 Dimensions and output series for rotating electrical machines—Part 1:Frame numbers 56 to 400 and flange numbers 55 to 1080

Publish Date: 1999-02-26

GB/T 4772.2-1999 Active

GB/T 4772.2-1999 Dimensions and output series for rotating electrical machines— Part 2:Frame numbers 355 to 1000 and flange numbers 1180 to 2360

Publish Date: 1999-02-26

GB/T 4772.3-1999 Active

GB/T 4772.3-1999 Dimensions and output series for rotating electrical machines— Part 3:Samll built-in motors flange numbers BF10 to BF50

Publish Date: 1999-02-26

GB 10068-2000 Replaced

GB 10068-2000 Mechanical vibration of certain machines with shaft heights 56mm and higher—Measurement,evaluation and limits of vibration

Publish Date: 2000-01-03

GB/T 17948.1-2000 Replaced

GB/T 17948.1-2000 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for wire-wound windings—Thermal evaluation and classification

Publish Date: 2000-01-03