T/NSSAA 001-2018 Active Group standards

T/NSSAA 001-2018 Ninghai County Cultural and Educational Sports Supplies Association Group Standard (Sports Stick)

Publish Date: 2018-08-01 Implement Date: 2018-08-15 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/NSSAA 001-2018

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Sports facilities and equipment

ICS Name: Terminology (principles and coordination and cooperation)

Publish Date: 2018-08-01

Implement Date: 2018-08-15

Scope

Main Technical Content: 5. Technical Requirements 5.1 Appearance The sports pole should not have defects such as burrs, cracks, scratches, or deformation (except for the pole tip). It should not have sharp edges. The grip should be easy to hold, with smooth edges and a comfortable feel. The pole tip should be equipped with a foot sleeve. The surface of the sports pole should be smooth, with clear patterns and uniform color, without deformation, shrinkage marks, or other defects. 5.2 Dimensions and Tolerances The actual length of the pole shaft should deviate from the marked length by no more than ±15 mm. The difference in actual length between the two poles of a paired sports pole should be no more than 7 mm. The area of the top of the hiking pole handle (impact surface) should be ≥13 cm2. The maximum possible cross-sectional area of the top of the hiking pole handle (impact surface) should be within a range of 10 mm below the highest point of the handle and not more than 10° from the vertical plane of the pole axis. The width of the wrist strap on hiking and walking poles should be ≥16 mm. 5.3 Physical Performance 5.3.1 Grip 5.3.1.1 Pressure resistance: According to the method in 6.3.1.1, the pole shaft should not penetrate the grip. 5.3.1.2 Tensile strength: According to the method in 6.3.1.2, the grip should not separate from the pole shaft. 5.3.2 Wrist strap According to the method in 6.3.2, the wrist strap should withstand a tensile load without tearing, damage, or breaking. 5.3.3 Pole shaft The pressure resistance of the pole shaft should meet the requirements in Table 1. Table 1 Serial Number Pressure resistance of the pole shaft 1 Hiking poles: Pass the test according to 6.3.3 with a vertical compression stroke of 30 mm and a pressure resistance of ≥320 N; or a vertical compression stroke of 50 mm and a pressure resistance of ≥250 N. The maximum unfolded length of the pole should not exceed 135 cm. 2 Walking poles: