GB/T 3238-1982
Active
GB/T 22159.2-2012
Active
National standards
GB/T 22159.2-2012 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 2:Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 22159.2-2012 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 2:Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
Basic Information
Standard Code:
GB/T 22159.2-2012
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Acoustic metrology
ICS Name:
Acoustics and acoustic measurement
Publish Date:
2012-12-31
Implement Date:
2013-06-01
Pages:
27 pages
Scope
This part of GB/T 22159 specifies the method for determining the translational dynamic stiffness of elastic supports under a given preload. This method involves laboratory measurements of input-side vibration and output resistance force, and is referred to as the "direct measurement method".
The method in this part is applicable to test elements with parallel flanges (see Figure 1).
Development Information
Same series standard
Referenced Standards
GB/T 22159.1-2012 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 1:Principles and guidelines
ISO 226
ISO 16063-21
ISO/IEC Guide 98-3
GB/T 2298-1991 Mechanical vibration and shock—Terminology
GB/T 2298-2010 Mechanical vibration,shock and condition monitoring—Vocabulary
GB/T 11349.1-1989 Experimental determination of mechanical mobility—Basic definitions and transducers
GB/T 11349.1-2006 Vibration and shock—Experimental determination of mechanical mobility—Part 1:Basic definitions and transducers
GB/T 11349.1-2018 Mechanical vibration and shock—Experimental determination of mechanical mobility—Part 1:Basic terms and definitions,and transducer specifications
GB/T 14412-1993 Mechanical vibration and shock—Mechanical mounting of accelerometers
GB/T 14412-2005 Mechanical vibration and shock—Mechanical mounting of accelerometers
Adopt standards
ISO 10846-2:2008
Related Standards
GB/T 3240-1982
Active
GB/T 3240-1982 Preferred frequencies for the acoustical measurement
GB/T 3785-1983
Replaced
GB/T 3785-1983 Electric, sonic properties and measuring methods for sound level meters
GB/T 5265-1985
Replaced
GB/T 5265-1985 Measurement of underwater noise
GB/T 7966-1987
Replaced
GB/T 7966-1987 Acoustics—Ultrasonic power measurement in the frequency range 0.5~10MHz
GB/T 11452-1989
Abolished