GB/T 1209.1-2009 Active National standards

GB/T 1209.1-2009 Agricultural machinery—Cutter bars—Part 1:Assembly

GB/T 1209.1-2009 Agricultural machinery—Cutter bars—Part 1:Assembly

Publish Date: 2009-11-30 Implement Date: 2010-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 1209.1-2009

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Agricultural machinery and equipment

ICS Name: Harvesting equipment

Publish Date: 2009-11-30

Implement Date: 2010-04-01

Pages: 13 pages

Scope

This part of GB/T 1209 specifies the types and basic dimensions, technical requirements, inspection rules, and marking, packaging, transportation, and storage of agricultural machinery cutters (hereinafter referred to as cutters).
This part applies to the assembly of agricultural machinery cutters.

Development Information

Word Count: 23 Thousand words Pages: 13 pages

Same series standard

GB/T 1209.2-2009 Agricultural machinery—Cutter bars—Part 2:Guard GB/T 1209.3-2009 Agricultural machinery—Cutter bars—Part 3:Knife sections,ledger plates and knife backs GB/T 1209.4-2009 Agricultural machinery—Cutter bars—Part 4:Knife clips GB/T 1209.5-2009 Agricultural machinery—Cutter bars—Part 5:Wearing plates

Replace the following standards

GB/T 1209-2002 Cutter bars for agricultural machinery

Referenced Standards

GB/T 41-2000 Hexagon nuts—Product grade C GB/T 95-2002 Plain washers—Product grade C GB/T 710-2008 Hot-rolled quality carbon structural steel sheets and strips GB/T 869-1986 GB/T 870-1986 GB/T 1209.2-2009 Agricultural machinery—Cutter bars—Part 2:Guard GB/T 1209.3-2009 Agricultural machinery—Cutter bars—Part 3:Knife sections,ledger plates and knife backs GB/T 1209.4-2009 Agricultural machinery—Cutter bars—Part 4:Knife clips GB/T 1209.5-2009 Agricultural machinery—Cutter bars—Part 5:Wearing plates GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 5783-2000 Hexagon head bolts—Full thread GB/T 6170-2000 Hexagon nuts,style 1 GB/T 10-1988 Flat countersunk square neck bolts GB/T 12-1988 Cup head square neck bolts GB/T 93-1987 Single coil spring lock washers--Normal type GB/T 867-1986 Round head rivets

Related Standards

GB/T 5982-1986 Replaced

GB/T 5982-1986 Testing method for rice and wheat thresher

Publish Date: 1986-04-04

GB/T 6979-1986 Replaced

GB/T 6979-1986 Terminology for grain harvesting machinery

Publish Date: 1986-11-08

GB/T 14178-1993 Replaced

GB/T 14178-1993 Measurement at the operator's position of airborne noise emitted by brush saws

Publish Date: 1993-02-16

GB/T 14179-1993 Replaced

GB/T 14179-1993 Brush saws—Measurements of hand-transmitted vibration

Publish Date: 1993-02-16

GB/T 14224-1993 Abolished

GB/T 14224-1993 Classification and terminology for machine of hay and forage harvesting

Publish Date: 1993-03-03

GB/T 14247-1993 Replaced

GB/T 14247-1993 Testing methods for rake

Publish Date: 1993-03-22