GB/T 11313.201-2018 Active National standards

GB/T 11313.201-2018 Radio-frequency connectors—Part 201:Electrical test methods—Reflection coefficient and voltage standing wave ratio

GB/T 11313.201-2018 Radio-frequency connectors—Part 201:Electrical test methods—Reflection coefficient and voltage standing wave ratio

Publish Date: 2018-09-17 Implement Date: 2019-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 11313.201-2018

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Coaxial cables, waveguides, and other RF cables

Publish Date: 2018-09-17

Implement Date: 2019-01-01

Pages: 11 pages

Scope

This part of GB/T 11313 specifies the test methods for the reflection coefficient, voltage standing wave ratio, and return loss of radio frequency connectors, including the frequency domain method, the time domain method, and the gated time domain method.
This part is applicable to the testing of radio frequency connectors connected to cables (hereinafter referred to as cable connectors), radio frequency connectors connected to microstrip lines (hereinafter referred to as microstrip connectors), and radio frequency connector adapters (hereinafter referred to as adapters), etc. It is also applicable to the testing of each radio frequency channel in multi-channel radio frequency connectors and mixed-type connectors.

Development Information

Word Count: 20 Thousand words Pages: 11 pages

Same series standard

GB/T 11313.11-2018 Radio-frequency connectors—Part 11:Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5 mm(0.374 in)with screw coupling with characteristic impedance 50 Ω (type 4.1/9.5) GB/T 11313.13-2018 Radio-frequency connectors—Part 13:Sectional specification for type 1.6/5.6 and 1.8/5.6 RF coaxial connectors GB/T 11313.15-2018 Radio frequency connectors—Part 15:R.F.coaxial connectors with inner diameter of outer conductor 4.13 mm(0.163 in),characteristic impedance 50 ohms,screw coupling(Type SMA) GB/T 11313.38-2018 Radio-frequency connectors—Part 38:Sectional specification for 50 Ω model,slide-in radio frequency coaxial connectors(type TMA)for rack and panel applications GB/T 11313.39-2018 Radio frequency connectors—Part 39:Sectional specification for CQM series quick lock RF connectors GB/T 11313.43-2018 Radio-frequency connectors—Part 43:Sectional specificaton for RBMA series blind mating RF coaxial connectors GB/T 11313.202-2018 Radio-frequency connectors—Part 202:Electrical test methods—Insertion loss

Referenced Standards

GB/T 11313.1-2000 Radio-frequency connectors Part 1-1:Single,multi-series blank detail specification GB/T 11313.1-2013 Radio-frequency connectors—Part 1:Generic specification—General requirements and measuring methods

Related Standards

GB/T 12774-1991 Abolished

GB/T 12774-1991 General specification for coaxial line electrical dummy loads

Publish Date: 1991-03-27

GB/T 15217-1994 Abolished

GB/T 15217-1994 Methods of measurement of screening attenuation for coaxial cables (absorbing clamp method)

Publish Date: 1994-08-08

GB/T 15285-1994 Replaced

GB/T 15285-1994 Sectional specification for leaky coaxial cables

Publish Date: 1994-12-06

GB/T 15866-1995 Replaced

GB/T 15866-1995 Radio frequency and coaxial cable assemblies—Part 2-1:Sectional specification for flexible coaxial cable assemblies

Publish Date: 1995-12-22

GB/T 15867-1995 Replaced

GB/T 15867-1995 Radio frequency and coaxial cable assemblies—Part 4:Sectional specification for semi-rigid coaxial cable assemblies

Publish Date: 1995-12-22

GB/T 16531-1996 Replaced

GB/T 16531-1996 Radio frequency and coaxial cable assemblies Part 3:Sectional specification for semi-flexible coaxial cable assemblies

Publish Date: 1996-09-09