GB/T 13840-1992
Abolished
YS/T 568.6-2008
Active
Industry standards-Non-ferrous metals
YS/T 568.6-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of titamium content—Diantipyrylmethane spectrophotometric method
YS/T 568.6-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of titamium content—Diantipyrylmethane spectrophotometric method
Basic Information
Standard Code:
YS/T 568.6-2008
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Rare high-melting-point metals and their alloys
ICS Name:
Other non-ferrous metals and their alloys
Publish Date:
2008-03-12
Implement Date:
2008-09-01
Pages:
5 pages
Scope
This section specifies the method for determining the titanium content in zirconia and hafnium oxide. This section is applicable to the determination of titanium content in zirconia and hafnium oxide. The measurement range is 0.005% to 2.5%.
Development Information
Same series standard
YS/T 568.1-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of zirconium oxide and hafnium oxide total content—Mandelic acid gravimetric method
YS/T 568.2-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of iron content—Sulfosal icylic acid spectrophotometric method
YS/T 568.3-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of silicon content—Spectrophotometric method with the reduced silicomolybdic complex
YS/T 568.4-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of aluminium content—Chronic azurol-S-tetradrcylpyridine chloride spectrophotometric method
YS/T 568.5-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of sodium content—Flame atomic absorption spectrometric method
YS/T 568.7-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of phosphorus content—The reduced molybdoantimonylphosphate complex spectrophotometric method
YS/T 568.8-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of Al,Ca,Mg,Mn,Na,Ni,Fe,Ti,Zn,Mo,V,Hf content in zirconium oxide—Inductively coupled plasma atomic emission spectrometry
YS/T 568.9-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of Al,Ca,Mg,Mn,Na,Ni,Fe,Ti,Zn,Mo,V,Zr content in hafnium oxide—Inductively coupled plasma atomic emission spectrometry
YS/T 568.10-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of manganese content—Potassium periodate spectrophotometric method
YS/T 568.11-2008 Chemical analysis methods for zirconium oxide and hafnium oxide—Determination of nickle content—α-Furil dioxime spectrophotometric method
Replace the following standards
YS/T 568.6-2006 (原GB/T 2590.6-1981)
Related Standards
GB/T 15677-1995
Replaced
GB/T 15677-1995 Lanthanum metal
GB/T 3136-1995
abolished_transferred
GB/T 3136-1995 Tantalum powders
GB/T 3463-1995
Abolished
GB/T 3463-1995 Tantalum wires
GB/T 3628-1995
Replaced
GB/T 3628-1995 Tantalum and tantalum alloy foils
GB/T 16476-1996
Replaced