GB/T 4652-2021 Active National standards

GB/T 4652-2021 Loader for underground mining—Testing method

GB/T 4652-2021 Loader for underground mining—Testing method

Publish Date: 2021-10-11 Implement Date: 2022-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 4652-2021

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Mining equipment

ICS Name: \nTunneling and laying pipeline equipment

Publish Date: 2021-10-11

Implement Date: 2022-05-01

Pages: 11 pages

Scope

This document specifies the test content and methods for underground mining rock loaders and loaders, including the testing of the whole machine's performance parameters, load tests, and industrial tests.
This document is applicable to the factory tests, type tests, and industrial tests of the following underground mining rock loaders and loaders (collectively referred to as "loaders"):
—— track-wheeled bucket rock loaders;
—— tire-wheeled bucket rock loaders;
—— crawler-wheeled bucket rock loaders;
—— underground excavation loaders;
—— shovel loaders;
—— upright claw loaders;
—— crawler-wheeled double-arm (crab-claw) loaders.
This document is not applicable to underground mining scraper rock loaders, haulage machines, and shovel loaders.

Development Information

Word Count: 21 Thousand words Pages: 11 pages

Replace the following standards

GB/T 4652-2003 Testing method of loader for underground mining

Referenced Standards

GB/T 8499 GB/T 6375-1986 Earth-moving machinery—Method of test for the measurement of draw-bar pull GB/T 6375-2008 Earth-moving machinery—Method of test for the measurement of drawbar pull GB/T 8419-2007 Earth-moving machinery—Laboratory evaluation of operator seat vibration GB/T 8419-2023 Earth-moving machinery—Laboratory evaluation of operator seat vibration GB/T 8591-2000 Earth-moving machinerg-Seat index point GB/T 10913-2005 Earth-moving machinery—Determination of ground speed GB 16710-2010 Earth-moving machinery—Noise limits GB 16710.1-1996 Earth-moving machinery—Noise limits GB/T 16710.2-1996 Measurement of exterior noise emitted by earth-moving machinery—Stationary test conditions GB/T 16710.3-1996 Measurement at the poerator's position of noise emitted by earth-movint machinery—Stationary test conditions GB/T 16710.4-1996 Measurement of exterior noise emitted by earth-moving machinery—Dynamic test conditions GB/T 16710.5-1996 Measurement at the operator's position of noise emitted by earth-moving machinery—Dynamic test conditions GB/T 21935-2008 Earth-moving machinery—Zones of comfort and reach for controls GB 16710-2025 Earth-moving machinery—Noise limits

Related Standards

MT/T 689.1-1997 Active

MT/T 689.1-1997 Plough—Specification of routine inspection

Publish Date: 1997-12-30

MT/T 689.2-1997 Active

MT/T 689.2-1997 Plough—Specification of type inspection

Publish Date: 1997-12-30

GB/T 5621-1999 Replaced

GB/T 5621-1999 Test methods of performance for rock drilling machines and pneumatic tools

Publish Date: 1999-06-14

GB/T 13343-2008 Active

GB/T 13343-2008 Blast hole tricone rock bits

Publish Date: 2008-07-09

GB/T 5621-2008 Active

GB/T 5621-2008 Test methods of performance for rock drilling machines and pneumatic tools

Publish Date: 2008-07-09

GB 25518-2010 Active

GB 25518-2010 Underground load-haul-dump—Safety requirements

Publish Date: 2010-12-01