T/NANTEA 001-2019 Pesticide spraying safety operation specifications for drone-based agricultural aircraft

Scope

Scope: This standard specifies the preparation for safe operation, on-site operation, and post-operation maintenance of plant protection drones. This standard applies to four-rotor plant protection drones, and eight-rotor plant protection drones may refer to it for implementation; Main technical content: 3. Preparation before operation 3.1 The plant protection drones shall comply with the relevant provisions of AC-91-FS-2015-31 and the requirements of NY/T 3213. 3.2 Flight range requirements: The flight range shall be strictly in accordance with the operation plan, and the flight distance shall be controlled within the line of sight. At the same time, the facilities and air control requirements around the operation site shall be understood. 3.3 Operation area requirements 3.3.1 The operation area and its surrounding areas shall avoid having trees, high-voltage power towers, electric wires, electric poles, and other obstacles that affect safe flight. 3.3.2 The operation area and its surrounding areas shall have suitable landing sites and flight routes for plant protection drones. 3.3.3 Non-restricted flight areas specified by the state. 3.4 Operator requirements 3.4.1 Operators shall obtain training certificates from relevant institutions. 3.4.2 Operators shall be in good health and shall not operate under the influence of alcohol or in an unfit condition. Those who are allergic to pesticides shall not operate. 3.4.3 Operators are strictly prohibited from wearing slippers and shall wear masks, helmets, anti-glare glasses, protective clothing, and operate in the upwind direction and facing away from the sun; operators shall maintain a safe distance of more than 5m from the plant protection drones. 3.5 Pesticide requirements 3.5.1 The pesticides sprayed shall be qualified products registered by the pesticide management department and shall comply with the provisions of NY/T 1276 and GB/T 8321.1-8231.9. 3.5.2 Highly efficient, low-toxicity, a

Development Information

Related Standards