GB/T 14627-1993
Replaced
GB/T 21718-2008
Replaced
National standards
GB/T 21718-2008 Fundamental technical requirements for small hydraulic turbines
GB/T 21718-2008 Fundamental technical requirements for small hydraulic turbines
Basic Information
Standard Code:
GB/T 21718-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nHydraulic turbines and their auxiliary equipment
ICS Name:
Hydraulic engineering
Publish Date:
2008-05-04
Implement Date:
2008-07-01
Pages:
17 pages
Scope
This standard specifies the technical requirements, main component structures, and material requirements for small hydraulic turbine products, the scope of equipment supply, spare parts, technical documents and drawings, inspection and acceptance, packaging, transportation and storage, installation, operation, and maintenance for small hydraulic turbines. This standard applies to mixed-flow, axial-flow, oblique-flow, through-flow, and impact hydraulic turbines with a unit power of between 500 kW and 10,000 kW and a runner diameter of less than 3.3 m. Hydraulic turbines with a unit power of between 100 kW and 500 kW may refer to this standard for implementation. Hydraulic turbines with a unit power and runner diameter exceeding the above conditions shall be implemented in accordance with GB/T 15468.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2900.45-1996 Electrotechnical terminology—Hydraulic turbine, storage pump and pump-turbine
GB/T 2900.45-2006 Electrotechnical terminology—Hydroelectric power plant machinery
GB/T 8564-2003 Specification installation of hydraulic turbine generator units
GB/T 8564-2023 Technical specification for installation of hydraulic turbine-generator units
GB/T 10969-1996 Specifications for water passage components of hydraulic turbines
GB/T 10969-2008 Specification for water passage components of hydraulic turbines,storage pumps and pump-turbines
GB 11120-1989 Turbine oils L-TSA
GB 11120-2011 Lubricating oils for turbines
DL/T 507-2014 DL/T 507-2014 Guidelines for Startup Test of Hydropower Generator Sets
DL/T 710-2018 DL/T 710-2018 Hydro Turbine Generator Set Operating Regulations
DL/T 827-2014 Lamp-through Flow-through Hydraulic Generator Unit Start-up Test Procedures
JB/T 1270-2014 Technical Conditions for Forged Shafts of Hydraulic Turbines and Hydraulic Generators
JB/T 6752-2013 Standard Procedures for Static Balance Test of Small and Medium Size Water Turbine Wheel
DL/T 507-2002 DL/T 507-2002 Specification for Start-up Test of Hydropower Generator Sets
DL/T 827-2002 Lamp-through Flow-through Turbine Generator Set Start-up Test Regulations
JB/T 1270-2002 Water turbine, water turbine generator shaft forgings technical specification
JB/T 6752-1993 JB/T 6752-1993 Standard for Static Balance Test of Small and Medium Size Water Turbine Wheel
JB/T 10384-2002 Small and medium-sized water turbine flow components cast steel parts
JB/T 8660-1997 Specifications for Packaging, Transportation, and Storage of Hydropower Units
DL/T 710-1999 Code of operation for hydraulic turbines
Related Standards
GB/T 15468-1995
Replaced
GB/T 15468-1995 Fundamental technical requirements for hydraulic turbines
GB/T 15469-1995
Replaced
GB/T 15469-1995 Cavitation pitting evaluation in reaction hydraulic turbines
GB/T 15613-1995
Replaced
GB/T 15613-1995 Code for model acceptance tests of hydraulic turbines
GB/T 16166-1996
Replaced
GB/T 16166-1996 Sacrificial anode cathodic protection for seawater cooling system in coastal power station
GB/T 10969-1996
Replaced