GB/T 10261-1988
Replaced
GB/T 11926-2025
Active
National standards
GB/T 11926-2025 Determination of phosphorus in uranium dioxide powder and pellets—Molybdenum blue spectrophotometric method
GB/T 11926-2025 Determination of phosphorus in uranium dioxide powder and pellets—Molybdenum blue spectrophotometric method
Basic Information
Standard Code:
GB/T 11926-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Nuclear materials, nuclear fuels, and their analysis and testing methods
ICS Name:
Nuclear energy engineering
Publish Date:
2025-08-29
Implement Date:
2025-08-29
Pages:
12 pages
Scope
This document describes the method of determining the phosphorus content in uranium dioxide powder and pellets using the molybdenum blue spectrophotometry method.
This document is applicable to the determination of phosphorus in uranium dioxide powder and pellets. The determination of phosphorus in uranium oxides such as uranium trioxide should be carried out in accordance with the relevant standards.
The measurement range of this document is 10μg/g~300μg/g, and the allowable impurities are Co 0.2mg/g; Ni 0.4mg/g; Fe, Mn, Cr, Sn, Cu, V, W, Si, Ti, F, Zn are all 0.5mg/g.
Development Information
Replace the following standards
Related Standards
GB 10408.6-1991
Replaced
GB 10408.6-1991 Combination microwave and passive infrared intrusion detector
GB/T 4079-1994
Replaced
GB/T 4079-1994 Test procedures for amplifiers and charge-sensitive preamplifiers used with detectors of ionizing radiation
GB/T 15444-1995
Active
GB/T 15444-1995 Regulations for monitoring radioactivity in effluents from uranium processing and nuclear fuel fabrication facilities
GB/T 15474-1995
Replaced
GB/T 15474-1995 Safety classification of instrumentation and control systems and their electrical equipment of nuclear power plants
GB/T 4960.1-1996
Replaced