GB/T 16580-2013 Active National standards

GB/T 16580-2013 D201 macroporous strongly basic styrene type anion exchange resins

GB/T 16580-2013 D201 macroporous strongly basic styrene type anion exchange resins

Publish Date: 2013-09-06 Implement Date: 2014-01-31 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 16580-2013

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Synthetic resins and plastics

ICS Name: Thermosetting plastics

Publish Date: 2013-09-06

Implement Date: 2014-01-31

Pages: 6 pages

Scope

This standard specifies the product classification, requirements, inspection rules, and marking, packaging, transportation, and storage of D201 macroporous strong alkaline styrene-based anion exchange resins.
This standard applies to D201 macroporous strong alkaline styrene-based anion exchange resins with amine groups as the main active groups. This product is mainly used in pure water preparation, wet metallurgy, and other applications.

Development Information

Word Count: 10 Thousand words Pages: 6 pages

Replace the following standards

GB/T 16580-1996 D201 macroporous strongly basic styrene type anion exchange resins

Referenced Standards

GB/T 1631-2008 Designation system and basis for specifications of ion exchange resins GB/T 5475-1985 Methods for sampling ion exchange resins GB/T 5475-2013 Methods for samping ion exchange resins GB/T 5476-1996 Methods for pretreating ion exchange resins GB/T 5476-2013 Methods of pretreating ion exchange resins GB/T 5757-1986 Determination for water retention capacity of ion exchange resins GB/T 5757-2008 Determination of moisture holding capacity of ion exchange resins GB/T 5758-2001 Determination for particle size range,effective size and uniformity coefficient of ion exchange resins GB/T 5758-2023 Determination for particle size,effective size and uniformity coefficient of ion exchange resins GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state GB/T 8331-1987 Method for the determination of bulk density of ion exchange resins in wet state GB/T 8331-2008 Determination of bulk density of ion exchange resins in wet state GB/T 11992-1989 Strong basic anion exchange resins in chloride form—Determination of exchange capacity GB/T 11992-2008 Determination of exchange capacity of strong basic anion exchange resins in chloride form GB/T 12598-2001 Determination for sphericity of ion exchange resins after attrition or osmotic-attrition GB/T 12598-2023 Plastics—Ion exchange resin—Determination for the rate of sphericity after osmotic-attrition and attrition

Related Standards

GB/T 4616-1984 Replaced

GB/T 4616-1984 Phenolic moulding materials—Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)

Publish Date: 1984-07-30

GB/T 4617-1984 Replaced

GB/T 4617-1984 Phenolic mouldings—Determination of acetone-soluble matter

Publish Date: 1984-07-30

GB/T 5471-1985 Replaced

GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials

Publish Date: 1985-10-17

GB/T 5472-1985 abolished_transferred

GB/T 5472-1985 Test method for rectangular flow cure properties of thermosetting moulding compounds

Publish Date: 1985-10-17

GB/T 5473-1985 Replaced

GB/T 5473-1985 Phenol-formaldehyde mouldings—Detection of free ammonia

Publish Date: 1985-10-17

GB/T 5474-1985 Replaced

GB/T 5474-1985 Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method

Publish Date: 1985-10-17