T/GDEIA 11-2019 Active Group standards

T/GDEIA 11-2019 Non-solvent CNC Composite Machine

Publish Date: 2019-05-15 Implement Date: 2019-08-15 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/GDEIA 11-2019

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Special-purpose machine tools

ICS Name: Rubber and plastic industrial equipment

Publish Date: 2019-05-15

Implement Date: 2019-08-15

Scope

Scope: This standard applies to CNC composite machines that use solvent-free adhesives to composite rolls of film, metal foil, and paper, among other substrates. Main technical content: CNC composite machines generally consist of unwinding, coating, and winding units, and are equipped with a CNC operating system, as well as auxiliary devices such as automatic mixing machines for two-component adhesives or automatic glue supply machines for single-component adhesives. 5.2.1 The radial runout of the metering steel roller, transfer steel roller, and coating steel roller should not exceed 0.01mm. 5.2.2 The radial runout of the composite steel roller and cooling steel roller should not exceed 0.01mm. 5.2.3 The radial runout of the guide roller should not exceed 0.03mm. 5.2.4 The relative parallelism error of the guide roller per meter should not exceed 0.02mm. The relative horizontal error of the guide roller per meter should not exceed 0.03mm. 5.2.5 The relative parallelism error of the metering steel roller, transfer steel roller, coating steel roller, composite steel roller, and cooling steel roller per meter should not exceed 0.02mm. The relative horizontal error of the metering steel roller, transfer steel roller, coating steel roller, composite steel roller, and cooling steel roller per meter should not exceed 0.02mm. 5.3 CNC Function and Operational Requirements 5.3.1 The CNC system of the CNC composite machine should meet the following technical requirements: a) The whole machine should have functions of automatic speed adjustment, automatic tension control, automatic alarm prompt, and automatic glue supply control; b) The whole machine should also have manual control functions; c) The system process motion should have functions of monitoring coating process parameters, composite process parameters, material roll movement parameters, drive system working status, and correction movement; d) It should have the function of remotely online co