GB/T 6587.1-1986
Replaced
GB/T 12665-2008
Replaced
National standards
GB/T 12665-2008 Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB/T 12665-2008 Requirements of damp-heat testing of electrical machine for service in general environmental condition
Basic Information
Standard Code:
GB/T 12665-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Rotating motor
ICS Name:
Environment testing
Publish Date:
2008-06-13
Implement Date:
2009-03-01
Pages:
8 pages
Scope
This standard specifies the wet heat test methods, technical requirements, and inspection rules for rotating motors used under general environmental conditions. This standard applies to all types of rotating motors (except for micro-control motors, hereinafter referred to as motors). According to GB 755, the relative humidity of the operating environment shall be: the average maximum relative humidity in the wettest month is 90%, and the average minimum temperature in that month shall not exceed 25 °C. Motors that meet these requirements shall comply with the provisions of this standard.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 755-2000 Rotating electrical machines—Rating and performance
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
Related Standards
GB/T 6587.2-1986
Replaced
GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
GB/T 6587.3-1986
Replaced
GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
GB/T 6587.4-1986
Replaced
GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 6587.5-1986
Replaced
GB/T 6587.5-1986 Shock tests for electronic measuring instruments
GB/T 6587.6-1986
Replaced