T/CVDA 5-2019 Active Group standards

T/CVDA 5-2019 Animal-use Oral Solid Heat Sealing Pad Plastic Bottle

Publish Date: 2019-12-18 Implement Date: 2020-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/CVDA 5-2019

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Chemical auxiliaries, surfactants, catalysts, and water treatment agents

ICS Name: Laboratory medicine

Publish Date: 2019-12-18

Implement Date: 2020-05-01

Scope

Scope: This standard specifies the terminology, product classification, technical requirements, characteristic indicators, test methods, inspection rules, marking, packaging, transportation, and storage of heat-sealed plastic bottles for veterinary oral solid preparations. This standard applies to packaging that directly contacts veterinary oral solid preparations. This standard applies to plastic bottles produced by blow molding using high-density polyethylene (HDPE), polypropylene (PP), and polyester (PET) as the main raw materials. Main technical content: 5 Technical requirements 5.1 Raw materials: Polyethylene (PE), polypropylene (PP), and polyester (PET). 5.2 Appearance quality: The appearance quality requirements shall comply with Table 1. Table 1: Appearance quality requirements Item Requirements Bottle mouth: The end face of the bottle mouth shall be flat, without chipping or missing parts, and there shall be no blockage defects inside the bottle mouth. Bottle body: The bottle body shall be fully molded, with uniform color and no obvious color differences. There shall be no sand holes, oil stains, bubbles, deformation, obvious shrinkage, or obvious scratches. Bottle bottom: The bottle can stand stably. Cover: The cover shall be fully molded, with uniform color and no obvious color differences. There shall be no oil stains, obvious shrinkage, or visible deformation. The screw threads shall be clean and free from deformation. Sealing gasket: The sealing gasket shall be flat and clean, without wrinkles, perforations, or stains. The composite film and cardboard shall not separate or fall out of the cover. 5.3 Characteristic indicators: The characteristic indicators shall comply with Table 2. Table 2: Characteristic indicators Item Requirements Identification: It shall be consistent with the reference spectrum. Sealing: There shall be no water ingress or bubbling in the bottle. Oscillation test: The bromophenol blue test paper shall